Your cart is empty.
Your cart is empty.The Infinity Bond Flex 50 applicator offers exceptional performance and versatility in PUR and hot melt dispensing. This gun is able to dispense any of the Infinity PUR or hot melt 50-gram cartridges with ease. The Flex 50 features a detachable power cord for corded or cordless dispensing. Other features include a powerful 500-watt heater, lighted on/off switch, and dual (high and low) temperature settings all with an easy-to-read digital readout. The Infinity Bond Flex 50 gun comes with a detachable power cord and a sturdy plastic stand. There is also a metal stand option allowing for even easier use in busy applications. Use the corded option for applications that require continuous dispensing, there is no need to recharge on the base with the power cord attached. The new cordless option is great for hard-to-reach spaces or large surface areas. The new and improved heater allows for 20 minutes of cordless dispensing.
Robert A. Sutherland
Reviewed in the United States on March 26, 2024
The heater barrel attaches using a ’bayonette’ style breech mechanism. Unfortunately there is no positive latching so the barrel containing the adhesive cartridge twists and falls off. Really bad in use.I compensated by using an appropriately sized o-ring which helps keep the bayonette in compression. It would be better if there was something to keep the barrel from twisting (like a thumbscrew or even a latch)
Justin
Reviewed in the United States on June 3, 2023
First off the glue is absolutely amazing. I build custom cabinetry and furniture for a living and the strength of the glue is top notch but it sadly ends there. Every tube of glue will leak out about a 1/4 of its contents over the course of 10 minutes. That adds up to a lot of money over the course of your average kitchen. Also the gun is flawed. It locks against the trigger so if you’re holding the gun at an angle and squeeze the trigger it will quickly twist and fall apart. Luckily I hold on to the power cord while I use it and have saved it from falling onto the concrete floor every time. For the price of the glue this product should function 100 times better but the quality of the functioning aspect of the gun just isn’t there. If I hadn’t already used it on a set of cabinets I would be returning for a refund but I don’t feel that is right since I used it for a whole job.
Christina Beebe
Reviewed in the United States on February 26, 2023
no issues
Justin Hamm
Reviewed in the United States on November 3, 2023
This glue is not really meant for your entire project assuming it is a large one for small projects you can use this for every joint but the things that you would use this glue gun for it works amazingly once you figure out how to use it. I use it for my end grain miter joints you first need to make sure that they are capless and seamless then apply a small amount to one side put your miter together move it back and forth Just slightly until the glue starts to set and then push it into a square and hold for a moment and you will have a miter joint that is ready for sanding and continued work but don't think that you're going to be able to paint this glue like regular wood glue and the paint stick because it won't miter needs to be tight
Michael S
Reviewed in the United States on November 17, 2023
I don't use the glue gun a lot - mostly for preassembly jobs - However it stopped working & I contacted the Manufacturer - Because I bought it through Amazon and not directly from them , they claim i have to take up warranty issues with Amazon & they ( the manufacturer can't /won't help . I am past the return window so essentially I have to toss it in the trash - I reluctantly bought a new one since I have 200.00 worth of glue I need to use up.. Just a buyer beware -I 'm not impressed with their customer service.
Ross Hotchkiss
Reviewed in the United States on January 15, 2022
The hot-melt polyurethane is indeed one of the strongest, most water-resistant glues I have ever used, so that's the main selling point. The gun itself isn't very well designed and tends to come apart during use. The workaround so far is to use a little tape to keep the two sections together, so it's functional.
Builder guy
Reviewed in the United States on September 20, 2021
I wanted the 30 second glue. I could only get the 60 second glue. Did a couple tests. After letting it sit for about 5 minutes (we were busy working), we were able to break the pieces apart. BUT, the glue didn't fail. The wood grain did. The glue held amazing.Well worth it. Now I'm going to buy some of the other glues.
claude armstrong
Reviewed in Canada on June 18, 2021
Collé les cadrages en 45 degré et autre
kg
Reviewed in the United States on October 14, 2021
I use this product for extremely strong joints. I build a lot of handrails. Peoples safety is paramount. In the past I would use wood glue and nails. This uses a hot polyurethane melt to create a peerless bond. I now don't have to use finish nails. The appearance of the finished product is far superior than before and also the durability is on another level. It is especially useful with projects when nothing else will work and you need a professional tool.
Recommended Products
