Your cart is empty.
Your cart is empty.Product Description
FEATURES
Cut Install Time By Half
These connectors free you from Stripping, Cutting, Soldering wires like the old way, and provide a much easier and quicker installation process.
Safe Connection
Thanks to the innovative wire blade design, these 2 pin led connectors won't loosen under condition of changing temperatures. They stand out with reliable secure connection than other type connectors. You will see they still hold tight, and keep good contact, after a few tests.
Small Enough
Practically invisible and compact to meet your individual needs, because of the compact size and transparent surface.
SPECS
- Material: Flame retardant housing + Copper
- Working Voltage: <300V
- Working Current: <10A
- Working Temperature: -22℉ ~ +185℉
- Fits Wire: 20-24 AWG stranded and solid wires. They may work with some 18 AWG wire, or not.
- Reusable: Can be opened if needed after use. Use a pocket knife or something to pop them open.
EASE YOUR WIRING EVERYWHERE
Lighting
LED Strips
Auto Wiring
Wiring Projects
Robert
Reviewed in the United States on March 8, 2025
Followed directions yet could not get consistent continuity. Ended up trashing them after an hour of frustration.
Mark J. Bush
Reviewed in the United States on March 6, 2025
Works
Mike K
Reviewed in the United States on February 8, 2025
I bought my wife a new radio for her truck for Christmas. These were awesome wiring the harnesses together really easy no wire stripping and they hold a lot better than electrical tape or soldering also made for a really fast installation.
paul herald
Reviewed in the United States on February 15, 2025
Breast products I’ve ever seen and used
fastboyy1
Reviewed in the United States on January 8, 2025
Takes some extra steps and care to accommodate flat ribbon three conductor AWG 22. Fragile to close. They do work, but probably better options are available.
Ronald
Reviewed in the United States on January 26, 2025
Used these to splice a car stereo harness to an adapter harness for my car. I didn't want to cut off the existing stereo connector (or splice wire ends together) so I opted for this instead. These taps worked perfectly for the data wires, but the power and ground were a bit too thick. I ended up clipping away at the plastic on the tap and eventually got them closed well. They probably would have worked without the clipping, but they didn't snap closed and that was a concern.Powering the stereo, it seems all the connections work. I'm getting speaker sounds all around so all the taps made the connections they were meant to. They got the job done and I'm pleased with it.
Customer
Reviewed in the United States on September 27, 2024
I had a broken oven thermostat that was connected to the oven wiring harness with a plastic clip style connection that had gotten hot and brittle. I used two of these connectors to connect a new oven thermostat to the oven wiring harness. After that I wrapped the connectors individually with electrical tape. This worked well enough to for my multi-meter therm o-couple to show the oven heating at 345 degrees F when the oven was set to 350 degrees F. One week later it is still working. I believe this product should not be used inside the hot part of an oven, so don't be an idiot putting plastic in an oven. This product is the easiest way I have found to splice two small wires together.
L Kom
Reviewed in the United States on December 2, 2024
I replaced a couple of JST SM Connectors in a Sole E35 Elliptical machine. The original JST SM collectors were hot clued on top of being crimped. And the wires had snapped off. I didn't need a crimping tool for these new connectors. There is a small "+" mark on one of the terminals to align the wires correctly on either side. I aligned my green wires to this "+" terminals and the red wires to the middle terminals on either side. It made it so easy to ensure that all wires were properly connecting on either side of the two connectors. Amazing, Simple & Brilliant design. Good quality.
Bill
Reviewed in Canada on April 17, 2024
My hot water tank in my trailer controller rams on a 9 volt battery and I needed to connect 2 wires work great
ww01
Reviewed in Canada on July 16, 2023
Fast ShippingGreat product as website descriptionEasy to use as instruction providedI had little trouble msg the seller responds was fast and accurate
Chris
Reviewed in Canada on May 27, 2023
They work just fine if you don’t want to have to solder anything, I should have got the 2 point ones but these were ok. I’ve opened them back up carefully and reused them… overall worthwhile purchase.
Carbor Undium
Reviewed in Mexico on August 30, 2022
El conector de cables es muy facil de usar, tiene una entrada para el cable de conexion muy sencillo y se usa presionandolo con una pinza para cerrar el broche y que los cables hagan contacto.El cierre es muy bueno y la calidad del producto es muy buena. Se siente y ve solido y el contacto de cables se hace muy bien a la primera.El tamaño es compacto, pero manejable.
J H COOK
Reviewed in the United Kingdom on January 7, 2021
Simple, does the job, used for car wiring
Recommended Products