Your cart is empty.
Your cart is empty.This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
Gregory Malcolm
Reviewed in the United States on March 4, 2025
2013 Tahoe. Part fit perfectly.
Charles Hendrix
Reviewed in the United States on February 7, 2025
So far so good, I bought some felpro gaskets and replaced the ones that came with the valve cover . You can’t go wrong with felpro. And this new updated version took care of the start smoke on my 2005 Silverado 5.3
Blazzin One Services LLC
Reviewed in the United States on January 26, 2025
Worked perfectly and fixed my leaking oil problem. Super easy to install on my 2009 Chevy suburban 1500 LT. no more blue smoke out the tail pipe.
Lee
Reviewed in Canada on August 5, 2024
Fit like factory, and now no blue smoke on startup after long trips. Make sure you clean the vacuum line from the PCV valve to the in take with brake clean.
Don
Reviewed in Canada on July 23, 2024
Installed on a 2010 6.2 ls. Gasket and bolts come with it. Direct replacement.
Kevin Zimmerman
Reviewed in the United States on December 13, 2024
Direct bolt on a 08 Suburban. Vehicle has been smoking on startup and consuming oil. This vavle cover is supposed to take care of that. It has an updated pcv system. Very easy install.
roller
Reviewed in Mexico on September 17, 2023
Excelente calidad funcionó a la perfección
Ahmad Emara
Reviewed in the United Arab Emirates on February 22, 2023
This one fix the oil consumption problime
Jesse MacKenzie
Reviewed in Canada on November 9, 2023
I do not have a photo or video of this valve cover installed but it fit perfectly on my 2005 Avalanche with a 5.3L engine, super easy to install and ZERO smoke puff at start up now which is friggin awesome cause at times my truck looked like it was trying to out smoke Cheech & Chong lmfao
Dan Poelstra
Reviewed in the United States on October 29, 2023
I bought this for my 06 silverado. The knly difference is the PCV tube, which did not effect anything, and was way cheaper than the specific 06 unit.I added a few drain holes and my smoky start up and oil consumption is completely eliminated. Perfect solution!
Chris Schafer
Reviewed in the United States on July 31, 2019
After disabling AFM several years ago, my 2009 silverado continued to have some oil consumption issues and smoke at startup from time to time. Research on the issue brought me to this product, in hopes to reduce the amount of oil coming into my intake through the PCV system. Since install, consumption is greatly reduced and smoke on startup is completely gone.As far as jobs go, this is very easy. The reason for 4 stars instead of 5: Casting could be better. Also, after my experience, I installed one on a friend's Sierra - one of the seals for the mounting bolts just didn't want to "mushroom" right when compressed. Its hard to describe, but it clearly didn't look right. No leak though.Overall, I would not hesitate to buy again or recommend this product.
JPTL
Reviewed in the United States on June 25, 2019
My '07 Suburban was blowing serious blue smoke at startup. At 250k I was ready to throw in the towel and deal with an engine with tired rings or valve seals. I had read about replacing the driver's side valve cover with an updated version, and that it had eliminated clouds of blue smoke at startup and greatly reduced oil consumption.I was very skeptical. But for less than $75 and under 30 minutes to install, I figured it couldn't hurt to try.This worked for me. I couldn't believe it. No more clouds of smoke at startup. I'll be measuring my oil consumption over time, but I'm sure consumption has gone down considerably.Like the factory part, this is cast aluminum. It is made in China, but fit perfectly. It came with the gasket and after 300+ miles, no leaks.
James P. George
Reviewed in the United States on November 21, 2019
Stopped my oil burning issue, 2008 Avalanche.Update. Even though I have no more oil burn at startup, my catch can that I had installed took a lot longer to fill. It filled up about 2/3 over a much longer time period and since the oil in there wasn't getting hot and moisture wasn't evaporating, it became 'milky'. This is no issue with the back cover. I do believe this oil would have entered the air intake and burned during driving, not startup, as the system is designed. The catch can merely caught oil that was designed to go into the intake during heavy acceleration when the hot air in the engine is pulled into the intake through the valve cover pcv. At least that my understanding of how this all works.Overall, great product, good fit and reduced oil consumption, that's for sure!!
Recommended Products
