Your cart is empty.
Your cart is empty.The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.
J.D.
Reviewed in the United States on August 5, 2022
I ordered one of these to replace one of the exact same model number that we've had for several years. The one we received looked very different and was of very poor quality. The clamp/head still moved around on the post, even with the knob fully turned as tight as it would go. The color(s) also seemed off. We though that there is a good chance the one we received was counterfeit because it was nothing like our "old" one. If what we received actually is a Fowler, I wouldn't ever buy one because the quality was horrible. We returned the first one we ordered and opted to receive another from Amazon. The second one came and was just like the first so we returned that one as well.
Frank
Reviewed in the United States on December 31, 2020
Other brand dial gauge stands are 2 to 3 times more money, this stand is good quality for the cost, this stand work's good for case gauge's to check headspace when reloading ammo. I would have given it 5 star's but I had to clean out the 3/8 hole the dial indicator goes in with a 3/8 drill bit because they had a build up of the finish coating.
straightup
Reviewed in the United States on December 13, 2018
I was looking for a relatively inexpensive indicator stand to measure a fixed dimension on a production part. Most of the inexpensive stands have a clamp arrangement with poor a adjustment hardware. This one looked better in the pictures so thought I'd give it a try. The work area is only 3" x 3" which is not the impression I get from the picture. 3" x 3" is too small to move the machined workpiece around to check the dimension at several points so had to return.
Recommended Products
