Your cart is empty.
Your cart is empty.The Rapidair 1/2 in. tubing x 1/2 in. tubing x 1/2 in. tubing Tee fitting, features a push to connect style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length and insert the tubing into the fitting. Tubing can be released by push button if desired.
Wes B
Reviewed in the United States on May 10, 2024
Rapid air is awesome, works well for a functional air system and is EASY to install vs the other options, while being far less dangerous than PVC after it gets brittle from UV exposure ( welding/sunlight will do it). Four years ago after having the PVC explode while no one was near it (over the plasma table) I replaced all the air lines with RapidAir, somewhere in my 300-400' of air lines I have a SMALL leak that will make the system +80 gallon tank leak from @180 to 20psi over a weekend with the compressor power off, But that could be at any of the threaded joints anywhere on the system, I haven't taken the time to track it down because I generally forget that its there unless I leave the compressor valve open. .
Leon D.
Reviewed in the United States on August 4, 2022
Like
Brenton R.
Reviewed in the United States on June 21, 2019
Worked as its supposed to, it seems like most of these type of connector leak when under low pressure but once under a certain amount of psi it seals well, felt really over priced but I needed a couple and they worked.
PDaSilva
Reviewed in the United States on October 18, 2019
The RapidAir system is the easiest way I know of to plumb a garage for compressed air. I just needed a T-fitting to complete my installation. Amazon got the fitting to me quickly and at a great price.
Abram Jewell
Reviewed in the United States on September 21, 2018
I used this Tee to split off the main line to two separate locations. Worked like a charm. Easy to connect and easy to mount. I wish this would have come in the rapidair kit that I bought. It's a little pricey but didn't have an alternative.
Patrick Neron
Reviewed in Canada on October 14, 2017
Exactly what I was looking for
Cappy
Reviewed in the United States on December 31, 2016
Worked very well, but a few leaked and required a permanent repair using crazy-glue
Chris C.
Reviewed in the United States on October 9, 2014
Rapidair system is excellent. I installed a halo configuration in my 1500 sq ft shop with 10 drops. It works perfectly and I haven't experienced any issues yet. It is easy to install and looks great.
Oil Pull
Reviewed in the United States on July 22, 2011
When I installed the RapidAir system in my shop, I did not believe that it could possibly seal. It was simply too easy to install. So, before I installed the drywall, I pressure tested it. To my suprise, not one leak! I even disconnected some of the outlets and reconnected, without cutting the tubing as they recommend, and still no leaks! Unbelieveable product and simple to use. It makes working with PVC seem difficult!I'm sold!
Recommended Products
