Your cart is empty.
Your cart is empty.Product Description
High Brightness
- 54pcs 3014 Chips High brightness
- 360 degree light angle
- safe and visible
Built in IC Driver
- Built in IC Driver , high performance
- Wide voltage 12V-24V
- Long life span
Universal 1157 Socket
- Universal 1157 dual contact point plug
- plug and play, easy to install
Wide Application for DRL Light, Brake light, turn signal light, 3 color for your choice
DRL light
brake light
turn signal light
Glass Eye
Reviewed in the United States on February 24, 2025
Super bright, I'll let the picture speak for itself!LED on the RIGHT, traditional bulb on the left
Okzeus
Reviewed in the United States on January 6, 2025
Light emitted is so much brighter that you can actually see the turn signals and brake lights on my 69 Mustang at dusk! Just twist out old bulbs and twist in the LED’s!
MrBear
Reviewed in the United States on September 10, 2024
I needed a constant light and this lit up in stages, also it didn't quite fit correctly, I had to modify slightly. It's very bright and uses less power.
Zero Signal
Reviewed in the United States on July 2, 2024
I recently switched my motorcycle over from incandescent bulbs over to LEDs. I did this for a couple of reasons:1. LEDs are brighter, and I want all of the visibility I can get on a bike2. LEDs usually run cooler, which keeps the old plastic housings on my bike from warping any more than they already are3. LEDs draw less power, which should keep the voltage regulator and rectifier alive a bit longer (I hope)4. LEDs should, in theory, last a long time.I specifically looked for LED bulbs that mentioned brightness in the reviews and that had multiple LED chips/dies on the circuit board in a circular array. Individual LEDs tend to emit light in a very narrow cone so it's important to have lots of them pointing in different directions.I put these in and was immediately impressed with the brightness of my turn signals. They are brighter than my original incandescent bulbs and throw a bright beam of light out in a nice, wide pattern. They're visible from the side of the bike as well as the rear, which is exactly what I wanted.I was worried that the light from the LEDs would be bluish and have a weird color behind the amber turn signals of my bike, but no problems with that-- they shine a nice, vivid amber color and don't look weird at all.If you do this, you'll probably need a different flasher, otherwise the turn signals will blink at a much faster rate. I bought a solid state flasher which cured the "hyper blink" problem for me, though some people don't seem to mind it.So now my bike is visible from every direction and all the lights are nice and bright.
charles
Reviewed in the United States on December 17, 2024
Great price good product.
Mat
Reviewed in the United States on November 13, 2024
I have some tinted rear taillights on my S13 and it was hard to see my brake lights at dusk with the OEM incandescent bulbs. These are MUCH brighter than stock. Don't buy the parts store Sylvania LED lights, they were dimmer than the stock bulbs. These work great.
PaulyFL
Reviewed in the United States on October 17, 2024
Used on 2007 Suzuki C50 brake/tail light and front turn/marker lights. Direct fit, no slop, not oversized, and brighter than the incandescent bulbs they replaced.Had to purchase direct fit LED flasher relay for turn signals to work correct hyper flash. NO issue with the brake light
Tony D
Reviewed in the United States on October 15, 2024
I tried to use these bulbs in the front parking/turn-signal lamps on my 67 Camaro. Unfortunately, the sockets are not removable from behind, so the bulb must be inserted by hand from the front and rotated to lock them in place. The cavity is recessed to the point where it's hard to both push in and turn to lock them.I tried to use several "tools" to install them and destroyed two before I gave up and reverted back to the original incandescent bulbs.These bulbs may work in a different application, but they didn't work for me.
Emil Eyford
Reviewed in Canada on June 6, 2023
Product is slightly too short, can’t insert far enough for it to twist into position.
SYED
Reviewed in Canada on June 19, 2023
I ordered for 4 bulbs but received only 2 bulbs
Philippe
Reviewed in Canada on May 24, 2023
The media could not be loaded.
Genci
Reviewed in Canada on February 15, 2023
Not satisfied. Low light.
Daniel Carter
Reviewed in Canada on April 27, 2023
The lower circuit board is too wide to allow fitment in the regular bayonet socket. I cannot use them. Please consider this for future manufacturing.
Recommended Products