Your cart is empty.
Your cart is empty.Product Description
Features:
- 100% brand new and high quality.
- Can be used dry but the best results are with water.
- Perfect for Granite, Concrete, Marble, Stone, Tiles, etc.
- Pro grade Wet/Dry, hook and loop backed flexible.
- Aggressive and sturdy made with quality diamond powder impregnated in pesin.
HOW TO INSTALL
Step 1
Connecting the 8mm Shank.
Step 2
Attach the polishing pad hook and loop side to the backer hook and loop side.
Step 3
Installed on the grinder or polisher.
DETAILS
Diamond Material
Aggressive and durable made with quality diamond powder impregnated in the resin.
Strong Sticking Ability
The surface of the tray is closely arranged with hooks, which are not easy to run away.
Nylon Velvet
High-quality nylon velvet, firmly boded, can be repeatedly torn and pasted.
NOTICE
The lower grit pads 50, 100, 150 works very well for dry usage. Lower grit dry grinding makes saw marks removal on the stone surface easy. The higher grits must be used with water for the best results.
Rose Mann
Reviewed in the United States on March 1, 2025
Great product
Eric Carlson
Reviewed in the United States on February 18, 2025
I was able to polish quartz stone with these. If you have ever tried to cut or drill through it you will will find quartz is very hard and difficult to work with. I tried wet and dry polishing. for the last super fine grades dry worked best. It took some time though.
Customer
Reviewed in the United States on August 24, 2024
I had a scrap of granite from our kitchen sink cut out. I used my angle grinder to cut the circular drill holes off the sides. I started polishing the long edge which was the only side which would be exposed. I laid a garden hose on the slab and trickled water across the face to lubricate the grinding pads.I chucked the pad holder into my 1/2” drill. Starting with 50 grit, I worked my way through every pad . I rolled the sander over the front lip with every pad change. I am very pleased with the results!
Kupczynski
Reviewed in the United States on December 3, 2024
Don’t waste your money it doesn’t work if you put on a high speed grinder, it will burn the plastic
Ryan
Reviewed in the United States on October 18, 2023
I fabricate all stone, Quartz, agate, resin, porcelain, etc, and fly through backing pads, from jamming them in areas they are too large for, wasting valuable time, protecting the surrounding area. I have a Dremel 4300, with different size adjustable chucks. I found one to hold this shaft great and it is a world of difference. The only complaint is they are only work well as wet pads, and it’s not always ideal. Pads may have low diamond ratio, to resin, but even in low, the 50 will burn a light colored Quartz. Posted two photos. The material is Cambria Bentley, Matte. The adapter is pointing to the right side, where a darker spot is. That is a pad burn, which usually only occurs at high speed and enough water during polishing. That is not the case here, I love the pad assembly and strength, but the pads are subpar for countertops.
Chungachan
Reviewed in Australia on October 13, 2023
Does the job
D. Smith
Reviewed in the United States on May 5, 2022
Bought this to finish a small piece of quartz countertop being made from a scrap piece we had gotton from a counter top maker (they have lots of drop pieces, usually for free - cut with a diamond blade in a circular saw).Only used these disks wet, they did not seem to run well dry. Since a small job I drilled a small hole in the bottom of a bean can, filled with water and that gave a slow trickle right where needed keeping the working area wet.Disks worked as expected, had no issues with the hook & loop attachment of the disks - very secure, take care to center them.The final finish was not a mirror finish but was very nice and looked the same as the factory finish on the top surface. Buffing compound would have got me to the mirror finish if was desired, may be different with natural stone.Very happy with product and results.
Tom M.
Reviewed in the United States on March 15, 2022
The media could not be loaded.
lee
Reviewed in the United Kingdom on November 24, 2022
Would definitely buy again, I initially thought they were useless but I think you need to bed them in.
T-dot
Reviewed in the United States on April 24, 2022
I bought these polishing pads to recreate a bevel on the manufactured stone seat and threshold that I installed in my shower. I was under the impression that these would work using my angle grinder, but that wasn't the case the kit came with 50 to 3000 grit polishing pads as shown in the listing. it also came with two threaded rods and two Velcro pad mounting attachments with female threaded connections to connect the provided rods. I can't remember now if the listing said it or not, but I had thought it stated it could be used with the threaded stem on your angle grinder. there may be some angle grinders for which that is the case, but not for mine. the female end in the pad mounting attachment was much smaller diameter than that of my angle grinder and so I wasn't able to use these pads on my angle grinder.the included threaded rods, however, screwed into the pad mounting attachment and the rod was easily able to fit in the chuck of both my corded and cordless drills.I attached each pad to the mount as I worked my way through the various grits to get from removing material to polishing the bevel I had created using the coarser grout pads. after attaching each pad to the mount, I dipped the polishing surface of each pad in a bucket of water and then commenced polishing. if the surface looked like it was getting dry I would rewet the pad and keep going. you don't feel like you're taking off much material on the coarser grit pads from 50-150, but you definitely are, so just be careful as you go. once you get above 300 grout you're not taking off much of anything and above 1000 you're just strictly polishing.they worked great and I've kept them to use on fire projects. I didn't need them for much so there's still loads of polishing surface yet to use so I can't speak to how much polishing you will get out of a set. all I can say is they worked great for what I needed them and when I was I couldn't tell the difference between the factory bevel and polish from what I'd done myself.well worth the money just don't count on using your angle grinder to do the work. you'll need to play around with how you hold your drill relative to the surface of whatever you're polishing because if you hold it wrong the pads will move around on you a lot. once you get a hang of that, the rest is easy and you'll get great results.I hope that helps!
Customer
Reviewed in Canada on July 9, 2021
Used for grinding tile edges. It lasts for a while. Good for the money. Quality is good
Eynon Thomas
Reviewed in the United Kingdom on March 15, 2021
Excellent! These work extremely well. I polished up about 3m of 30mm granite worktop edge with about 20% wear on disc edge of 50 grit disc. I think I was a little heavy handed on disc edge as wear on middle of disc was minimal. Two pads meant I could mount in two tools. Excellent delivery and very small box, so very little packaging. Well done.
Shams
Reviewed in Canada on December 1, 2020
Haven’t used it yet. Looks great tools
Recommended Products