Your cart is empty.
Your cart is empty. Specifications:
Total length: 24mm
Max axle diameter: 5mm
Axle thread: M4
Screw cap diameter: 12mm/0.47"(OD)
Great if looking to put 1/8 scale 17mm hex wheels on your model
Adapters and wheel nuts are anodized Titanium in color
Fitment:
Will fit all 1/10 RC cars with 12mm wheel hex
Will fit HSP models 1/10 (all)
Please make sure the interchange part number matches the part you are replacing.
Please check our photos and make sure the part shown looks identical to your stock one.
Package list:
4x wheel adapters
4x 5mm bolt4x Screw cap
hobbyhead
Reviewed in the United States on August 7, 2024
This is a good choice for upgrading to 17mm hex tires. They even add some width for add stability they are easy to install just remember to use LOCKTITE and you will be fine. I definitely recommend these
Nick
Reviewed in the United States on August 25, 2024
Worked perfect on the 4X4 rustler vxl
Brian
Reviewed in the United States on May 27, 2024
I run these on my modified Traxxas Bandit and have run it to speeds well over 100 mph and they work great! Just make sure you use some blue thread locker and you should be good to go! Excellent product that is priced very fairly!
Customer
Reviewed in the United States on March 14, 2024
Used blue loctite on the long nut and the 17 mm nut l, waited 24 hours and haven't had an issue after some serious jumps and crashes.
Kaden b.
Reviewed in the United States on October 22, 2024
Used for turning my traxxas ultimate into a backslash buggy.Update: I ordered these again for another car and 1 of the 17mm nuts was machined wrong, the serrations were too deep that they cut into the threads. It would’ve ruined the adapter threads if I had tried to use it. Fortunately I had other spare 17mm nuts to replace. Not a big deal but would’ve been if I didn’t have spares
travis
Reviewed in the United States on April 5, 2024
Used on a traxxas 4x4 vxl, I was able to run 17mm buggy wheels. Install was easy, great product.
Defnette
Reviewed in Canada on July 4, 2023
Simple to install. Nothing is binding up. Make sure you use lock tight and let it dry over night.
Hudson JC
Reviewed in Canada on September 19, 2022
I bought these to fit 1/8 scale buggy racing tires on the traxxas rustler 2 wheel drive and they work pretty good make sure you lock Tight them or they will fall off but even with lock tight they do come loose after one run on my 2S battery "brushless" but they won't fall off so just be aware of that of that and yes I let the lock tight dry for 24 hours
Blake Anderson
Reviewed in the United States on July 21, 2022
My local hobby shop only had aluminum Traxxas branded 12mm to 17mm hubs in stock and those were 45$!!! These have been far better. They haven't loosened up and flung any wheels and they are very affordable. I bought another set to put in my other wheels just so I don't have to swap hub adapters every time. Great product.
minh
Reviewed in the United States on April 18, 2021
Nice fit perfect
Recommended Products
