Your cart is empty.
Your cart is empty.Product Description
Beduan, manufacturer & distributor of top pneumatic supplies
Our production line includes:
- Compressor Filter and Regulator
- Push to Connect Fittings
- Solenoid Valve
- Compressed Ferrule Fitting
- Marginal product
- Search Beduan and choose what you want
Beduan High Pressure Air Regulator
Regulator for Compressed Air Systems
Air Inlet Size: 1/4" | 3/8" | 1/2" NPT
Flow Rate : 56/116/ 141 SCFM
Operating Pressure: 0-180 psi
Max Supply Pressure: 230 psi
Working Temperature: 0-60°C | 32～140°F
- The design can be disassembled and combined arbitrarily,
- Flexible adjustment of different levels of pressure.
- Balanced intake structure is adopted
Product Features
Press-in Self-locking Regulator
The self-locking pressure adjustment mode is adopted to prevent the pressure from changing due to external interference
Pull up to adjust the air pressure, press in lock to adjust the pressure value after the adjustment is completed
Red copper pressure gauge
The copper core pressure gauge is accurate and convenient for reading, and the strong plastic casing has strong impact resistance and durability.
Precision NPT Thread
Fine grinding process, thread inner wall smooth without burr, not easy to leak sealing strong.
Usage Scenario
Notes
- Before installing the accessories, please wrap the sealing tape around the fittings to prevent air leakage.
- Before assembly, it is necessary to fully blow off the chips and dust in the piping to prevent the debris of sealing materials from mixing.
- Inlet and outlet direction should not be installed in the opposite direction, vertical installation, water cup downward.In order to facilitate maintenance, appropriate space should be set aside above and below.
- Do not install near air compressor. Due to the air temperature is higher, a large amount of moisture is still in the state of water vapor.It should be installed near the gas device to ensure that most of the moisture in the air has been condensed into liquid water
- Drain water when the water level is close to the baffle, or discharge condensed water regularly.Discharge by hand, not with tools.If you forget to discharge the condensed water, once the condensed water reaches the filter element, the separated condensed water will flow out from both sides, polluting the downstream pneumatic components.Must pay attention to
- In order to prevent the water cup from breaking and injuring others, metal protective cover should be installed outside the water cup.Check the glass regularly for cracks and contamination
- Sunlight exposure should be avoided
Happy Customer
Reviewed in the United States on August 7, 2024
They hold tight even when supply air is down
Happy Customer
Reviewed in the United States on August 7, 2024
They hold tight even when supply air is down
George
Reviewed in Canada on December 3, 2024
Won’t adjust . Very frustrating. Price payed for ordering on line
George
Reviewed in Canada on December 3, 2024
Won’t adjust . Very frustrating. Price payed for ordering on line
Bazooka Joe
Reviewed in the United States on November 14, 2024
Works well but one of the 1/4NPT fittings will not stop leaking. I've cleaned the threads, used new fittings with tape, liquid thread sealant...no luck. Resorted to using a shutoff before it so it doesn't drain my tank when not in use.
Bazooka Joe
Reviewed in the United States on November 14, 2024
Works well but one of the 1/4NPT fittings will not stop leaking. I've cleaned the threads, used new fittings with tape, liquid thread sealant...no luck. Resorted to using a shutoff before it so it doesn't drain my tank when not in use.
David
Reviewed in the United States on April 11, 2024
These seem well made but are very hard to seal properly when attaching components to them, tried thread tape, pipe sealant, even locktite to seal these up in the end I had to cut and fit rubber washers for the fitting to bottom out to get a tight seal, we are only using 100 psi main pressure so this should not be an issue. I suggest buying a better brand.
David
Reviewed in the United States on April 11, 2024
These seem well made but are very hard to seal properly when attaching components to them, tried thread tape, pipe sealant, even locktite to seal these up in the end I had to cut and fit rubber washers for the fitting to bottom out to get a tight seal, we are only using 100 psi main pressure so this should not be an issue. I suggest buying a better brand.
stan tarkowski
Reviewed in the United States on June 28, 2023
Seems heavy duty but leaks bad through air gage already past return window we will see if it has a warranty
stan tarkowski
Reviewed in the United States on June 28, 2023
Seems heavy duty but leaks bad through air gage already past return window we will see if it has a warranty
Warren W.
Reviewed in the United States on June 21, 2023
I appreciate the construction of this regulator. It seems well built and solid-much better than what came with my compressor.It was very easy to replace and came with all the requisite accessories. I could have purchased one at Lowe’s but waited for this to be delivered and I’m glad I did.
Warren W.
Reviewed in the United States on June 21, 2023
I appreciate the construction of this regulator. It seems well built and solid-much better than what came with my compressor.It was very easy to replace and came with all the requisite accessories. I could have purchased one at Lowe’s but waited for this to be delivered and I’m glad I did.
Jankel Watro
Reviewed in the United States on December 17, 2023
It works but there is no pressure gauge like in the picture and object was in a maufactor type box that was all torn up in another box. Probably why there was no pressure gauge
Jankel Watro
Reviewed in the United States on December 17, 2023
It works but there is no pressure gauge like in the picture and object was in a maufactor type box that was all torn up in another box. Probably why there was no pressure gauge
Ford Truck Guy
Reviewed in the United States on November 26, 2023
So I was concerned I may have an issue after some reviews stated leakage . Well mine is perfect ! Came with all you need to install.. its exactly perfect .. it seems like great quality. I installed it on a Prime Air 2500 portable air compressor... Adjusting pressure is exactly like before too ...
Ford Truck Guy
Reviewed in the United States on November 26, 2023
So I was concerned I may have an issue after some reviews stated leakage . Well mine is perfect ! Came with all you need to install.. its exactly perfect .. it seems like great quality. I installed it on a Prime Air 2500 portable air compressor... Adjusting pressure is exactly like before too ...
Franklin L.
Reviewed in the United States on December 10, 2022
Fit my air compressor as like a glove.
Franklin L.
Reviewed in the United States on December 10, 2022
Fit my air compressor as like a glove.
Recommended Products
$40.58
$ 17 .99 $17.99
$212.69
$ 99 .00 $99.00