Your cart is empty.
Your cart is empty.Bissell Steamer Bladder 203-6674
Richard
Reviewed in the United States on March 8, 2024
But let me tell you to be SURE you fill the tank up with some hot water to get it pliable BEFORE you attempt an installation. If you don't, you may go a tad crazy trying to fit it.Fill it with some hot water, let it sit, soften, drain it then install it. It isn't easy but it beats throwing the cleaner away! My advice would be to do the filling, softening and draining in your kitchen sink. :-)
Tom O
Reviewed in the United States on March 20, 2024
Update: I wanted to add that this vendor did sell an OEM product, and the issue was not the fault of the vendor. The same product direct from Bissell is identical, even in packaging. The problem is likely attributed to random variances in the product, which is made overseas. Previously: I will say shipping speed was good for a 3rd party vendor. The product material was very similar to the old tank bladder, but of slightly different material based on color, pliability, thickness, etc. The larger surfaces were of comparable thickness, but the corners were very thin and likely problematic for cleaners with heaters, or if you use too water that is too hot. The main problem was the depth/length of the lower outlet. It was about 3/16 to 1/4 inch too short, preventing the lip from exiting the tank, and would cause too much strain and pinching on the bladder to pull it through to fit properly. It is possible this bladder could fit certain models better than others, but there is no way from a consumer standpoint to be sure. So, will be reordering directly from Bissell.
Ray Rodriguez
Reviewed in the United States on March 10, 2024
I liked the near perfect match to the original equipment Though it was a bit difficult getting the bottom valve installed to it. Haven't tested it yet though it looks like it should work well.
Paul kora
Reviewed in the United States on January 25, 2023
Fits like a charm but only worked for a little while the right back with a whole
Austin
Reviewed in the United States on August 3, 2021
Bought this after the original wore out and tore. Fits perfectly. Bit of a pain getting in the first time because it was stiff but the original was like that when we first got the carpet cleaner, it was already in the tank though and after the first use it becomes more flexible
Bryan S
Reviewed in the United States on December 4, 2020
Not correct size as advertised. Did not fit my shampooer. Would not accept return since I waited 30 days to swap it out =( will change to 5 stars if they send me the correct size!
rlmoore1
Reviewed in the United States on November 8, 2019
it was exactly, what I needed and fit perfect.
Grey
Reviewed in the United States on April 5, 2017
Bag arrived quickly and after some finegalling seated into my shampooer perfectly. Um, the finegalling was necessary, not a negative, those bladders are tough to swap out! But I can definitely recommend this bladder as a serviceable replacement.
Recommended Products
