Your cart is empty.
Your cart is empty.Easily installed in any Blue Sea Systems circuit breaker panel Simple push-in installation mounts in any thickness material Meets UL1500 and ISO8846 ignition protection requirements. -Fits securely in 11/64" dia. mounting hole -Use with Blue Sea Systems electrical panels
brett scott
Reviewed in the United States on January 13, 2025
Good quality
Customer
Reviewed in the United States on December 14, 2024
It works but be aware that the actual bulb is about the size of a BB.
matthew
Reviewed in the United States on April 10, 2024
Well put together, not too bright but just bright enough, includes in-line resistor, accurate mounting diameter printed right on the product packaging along with wire gauge, voltage and current specs.I used it on an amplifier to indicate when the fuse has blown and needs replacing. Flawless install thanks to clear info on packaging.The only critique I can think of, and it's mostly superficial, would be to use silicone-jacketed wires with 600V insulation rating for that extra protection and ease of install. But really that's not a deterrent for me, just a suggestion. Also doesn't indicate country of manufacture, but the company itself seems to be an American company in Washington state. Bonus points if they also manufacture in the US.If you need a 120V AC indicator lamp, this is a great choice.
Radist
Reviewed in the United States on March 23, 2023
Bought 2 for 120VAC and 1 for 24VAC. Works perfectly. It was easy to fit them snugly in the thin metal cover plate, just had to find a proper drill bit. Plus, they were the smallest LED lights I could find. Hope they will work for a long time. I don’t understand how come some people complain about brightness. They are not for illumination, they are indicator lights, and fulfill that purpose perfectly. All three give about equally bright light, can’t miss it in a brightly lit room, see the photo.
RAFAEL GUILLEN VERDIN
Reviewed in Mexico on December 14, 2023
Perfecto para señalar el encendido de un equipo
Brad
Reviewed in Canada on August 18, 2022
I have it installed on my panel to ensure the polarity is correct, some times marinas wire up the docks wrong and have the common hot.
Christopher L.
Reviewed in Canada on June 12, 2020
Works, very nice for wiring in telltales. Not bright, which is ideal.
joseph p mccarthy
Reviewed in the United States on November 18, 2020
I needed to be able to look out at night and verify the power was on in my wife's greenhouse. If heaters trip their breaker, and turn off during just one freezing night she would lose everything. I tried purchasing the smallest light bulbs available so we could glance out and verify things were 'on'. Too bright. Even a 5 watt bulb was way too much. This little gem is just perfect, though. I soldered it to a 110 v cord end, and made a tab it snaps through. Attached it to the glazing. Now, we look out at night and see a green pin point in the black of night. Her plants sleep in peace, and so do we. Comments about this being dim or small??? Sometimes dim and small are just perfect.
Draidor
Reviewed in Canada on March 3, 2019
I live year round in an RV and wanted to know when my tiny 5 gal hot water tank is still heating the water and when the water is at hot as it is going to get. This little light was the perfect solution. It comes on while the water is heating and shuts off when the water is hot. Surprisingly small, which you don't see in the picture they supply.
leon t piniuta
Reviewed in Canada on April 24, 2019
Perfect for my application . And that goes for the other items in my order. but I dont know to say that, how to .will buy more someday
Dr Bob
Reviewed in the United States on September 19, 2018
The LED works fine for my application. I'm using it as an indicator light on the dash to remind me if I forget to turn off an accessory. If you're looking for a really bright light, you'll want to look elsewhere. This LED is rather dim in a 12v automotive setting, which in my case is better than a distracting super bright LED. So keep in mind your intended application when deciding whether or not to order. I really like the compact size- neat and clean install in a 11/64" hole.
Aphrael
Reviewed in the United States on May 23, 2017
These perfectly fit the Blue Sea Systems electrical control panel in our camping trailer. They were easy to install to replace three of the original indicator lamps that were burned out. The price was very fair for these hard-to-find lamps, with fast Prime shipping. I'm very happy with the purchase.Those reviewers who complain that this LED is not bright enough should perhaps realize that this indicator is intended for a specific application to fit Blue Sea System circuit breaker panels. In this application you are standing very close to the panel when you turn a breaker on or off. The lamp only serves to indicate that voltage is passing through the breaker. This is not something a person normally looks at very often. This LED is an appropriate size and brightness for this kind of application. It is not easy to find small self-contained LED indicator lamps that connect directly across a 120 volt AC line the way this one does. All LED bulbs operate on low DC voltage, and 120 VAC must be rectified and down converted. This makes this a rather special indicator.
AF
Reviewed in the United States on April 7, 2015
I was looking for a small LED i could wire in to let me know my fan was on. Out of quite a bit of research i settled on this and I'm quite happy I did. The upside is that it is really small. The downside as some might find is the led is not nearly as bright but that is subjective b/c I don't want a bright led bulb that will blind me either at night. For me this is a perfect product. The resistor is soldered on the end of the wire and thus you have to keep the bend radius in mind if you plan to put it in a very tight spot. The led fades in and out which is pleasant as opposed to a momentary on/off led. Overall good product and will order again if need be.
Recommended Products
