Your cart is empty.
Your cart is empty.Product Description
DIY Computer Essential
The Cable Matters 15 pin SATA to 4 SATA Power Splitter Cable is an essential component for building, upgrading or repairing computers. The 18-inch cable harness provides sufficient length to neatly power up to 4 drives. Connect with a single cable to minimize the impact on airflow in your computer case.
Cost-Effective 2-Pack
This convenient 2-pack of SATA power splitter cables provides a spare or replacement power cable for an upgrade or repair.
Important Note
Check the rating of your power supply to confirm that it can support additional drives
Built to run 24/7
1) 4x 15-pin SATA receptacles to drives
2) 15-pin SATA male plug to PSU
- Supports 3.3V, 5V, 12V voltages
- 2.5" and 3.5" SATA drive compatible
Cable Specifications
Total Cable Length: 18 inches
Receptacles spaced at 4.5” intervals
UL 1007 18 AWG wire
Power Sharing x4
Upgrade your SSD for better speed
Install a new HDD for storage
Add an optical drive for convenience
Kooky Canuck
Reviewed in Canada on March 2, 2025
Good quality. Just what I needed. Would buy again.
Mike Lomax
Reviewed in the United States on February 25, 2025
Works as advertised. Absolutely love how easy this makes it to setup multiple HDDs. Great quality, well made.
Robert
Reviewed in Canada on February 18, 2025
These are designed to start from the top and run downwards. I needed something that starts at the bottom and runs upwards, but I was unable to find any that did that at this price point. The experiment was to remove the connectors, flip, rotate, and reconnect them so that it could run from the bottom upwards. It worked like a charm (assuming charms work). 5 stars for how easy it is to change the orientation of the connectors.
BS
Reviewed in the United States on August 14, 2024
These cables appear very well made and strong.I've been using them for a while now and have not had any problems.Fast Delivery too!
Zurvivor
Reviewed in the United States on May 11, 2024
I needed some extenders to power a SSD I was installing. These worked perfectly for the job and feel much more premium than what you would expect for what you pay.
JOSHUA
Reviewed in the United States on March 4, 2024
At the input end of this adapter, just snip the 3.3v line off, then you can run this up the back of four shucked drives without messing around with tape or other weird solutions to the 3.3v problem. Any modern, major reputable brand PSU (like EVGA) should have enough juice on a SATA 12v rail to spin up all four drives without sag. I run two of these adapters and spin 100TB of 8 shucked EasyStores off them.These are good, solid, safe adapters for the purpose. All you have to do is snip that wire.
John Wilson
Reviewed in Canada on December 10, 2024
Worked perfect on my old coolermaster PSU. High quality crimped connections and you can even customize them if you felt inclined to get specific distances.
malkhalil
Reviewed in the United Arab Emirates on April 28, 2024
very fragile and the wires are easy to get loose and get out of the port
ZX6R
Reviewed in the United States on April 1, 2024
Needed to drive two HDDs in an array in a system that has few SATA power connectors. This worked great.
Chuck
Reviewed in the United States on February 10, 2023
I was worried because I've actually had hard drive power plugs break off of old/cheap drives before, so the fact that these cables require a pretty strong insertion force is a bit stressful. However, they worked well and nothing broke, so I guess I'm happy. Useful for a DIY NAS server with more drives than PSU power plugs.
Customer
Reviewed in Canada on November 1, 2023
I purchased two of these Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches, for use in a 16-drive server I was having issue with. The cables were only used for testing, and served that purpose perfectly. I avoided other brands of cables based on the bad and mixed reviews. I didn't want to hassle with potentially bad cables, as I was already hassling with potentially bad drives, so I paid a little more and don't regret doing so.
Mic
Reviewed in the United States on November 28, 2021
These type of extension cords are always so-so to me. I would never trust them too much because they add extra load to your current power cable. However, I have to use it otherwise it means extra cash on the PSU that I don't really need.I started using one of them in my NAS built and it was working fine. Recently I expanded my NAS drives from 8 to 10, and moved my setup from a itx case + drive cage => mid ATX case.Then I used this one along with a 1-2 sata power splitter cable. So one of my line would be EVGA 3 head sata power cable + this extension + Y splitter. I was hesitated a little bit but still decided to give it a try. The power usage is not that huge so it should be okay.And it works.For this reason, I give this extension cord a 5 star rating. However, it's always YMMV. If your cable shows signs of issue, which will eventually happen to someone (it's a possibility game), and if you doubt, you don't use it, simple as that.Tips: check the cable connections, check the sata power head metal quality. If you cannot find anything abnormal, it should be okay.
MarkS
Reviewed in the United States on December 16, 2020
I got these not to overload a power supply but to have a nice clean build for my server and limit the amount of wire pooled up by the drives. The spacing is good enough to either wire every other drive or have a manageable loop if spacing dense drives. The connectors are nice and tight on the drive, and most importantly no molded crap that can and have caught fire for others.
Recommended Products