Your cart is empty.
Your cart is empty.Product Description
About CYCPLUS
CYCPLUS is a brand you can totally trust. We have specialized in bicycle products since 2014. Everyone in the CYCPLUS team is a passionate cyclist! Our products include:
- Electric Bike Pump
- GPS Bike Computer
- Speed and Cadence Sensor
- Heart Rate Monitor
- USB ANT+ Stick
- More
As experienced professionals, we know very well what is important for cyclists. Bike with us and enjoy your ride!
Widely compatible
The CYCPLUS C3 speed&cadence sensor can be connected to a variety of Bluetooth or ANT+ enabled devices and APPs.
IP67 Water-proof
With this 2 in 1 speed&cadence sensor, you can enjoy your ride in all weather with no worries.
300 Days Standby Time
No charging needed. With just 1 button battery, you can cycle 2 hours everyday for 8 months.
NOTES：
1. Before use, open the battery cover and remove the clear insulating gasket.
2. One sensor cannot measure both speed and pedaling frequency. If you need to measure them at the same time, then grab a 2PCs pack.
3. For speed measurement, the hub width must exceed 38 mm.
4. Please do not connect the sensor directly via Bluetooth setting on your phone. Note: The Bluetooth of this product can only be applied to the corresponding fitness app, for example, Zwift. can not be directly connected to the cell phone, because of the protocol, the general cell phone does not come with fitness apps.
Function one: Speed measurement
- Toggle the switch to the S position.
- Secure the curved rubber pad to the bottom of the product and secure the sensor to the hub with a rubber band.
- Turn the bike wheel to wake up the sensor, then connect it to the device or APP.
Function two: Cadence measurement
- Toggle switch to C position.
- Fix the flat rubber mat on the bottom of the product and use a rubber band to fix the sensor on the crank.
- Turn the crank to wake up the sensor, and then connect it to a device or APP.
TM2
Reviewed in the United States on February 8, 2025
Ive had the Cycplus for a year now and just had to replace the battery. I use it for cadence and it synced well with my RideWithGPS App. I did not use the rubber bands, but installed with small zip ties.
marky mark
Reviewed in the United States on February 6, 2025
Stopped working after less than two months of use with perhaps 2 outdoor rides total in non rainy conditions. Worked well enough initially for the price with the main annoyance is the sensors would go into a short sleep mode every few minutes and not register with even the companies own app. You pay for what you get apparently. I almost went ahead was about to purchase cycling gps/computer for the value but thankfully the issue came up with the power meters before I made the purchases. I’d just spend a few more dollars and get something for a more reputable company with more reviews.
AustinCy
Reviewed in the United States on January 20, 2025
I ended up adding two of these since the CYCPLUS computer's GPS just seemed way to slow at beginning of ride to start accurately tracking true distance. Other unit to monitor cadence. Easy to pair with computer and to mount.
Greg
Reviewed in the United States on June 10, 2024
I use this with the cadence app, works great for speed and cadence. Set up is easy with my iPhone and it avoids needing a separate cycle computer. The only drawback is you need to have plenty of cell phone charge as the phone drains pretty quickly. I did a 21 mile ride over a 1:20 period and battery went from 100% to 68% on my IPhone 14 Pro with a healthy battery life. I can’t speak to the battery life of the individual trackers. Also not sure what the advantage of using the sensor vs GPS signal is for speed. The cadence app allows you to use GPS or give the tracker priority, so I guess if you’re in an area with poor GPS coverage it would e useful. It’s distance and speed is accurate compared to GPS, riding the same route with GPS tracking gives identical results within .1 miles as the sensor.
Pasquale 61
Reviewed in the United States on February 9, 2024
This has worked flawlessly for me, and the price is right! I had some difficulty pairing this with my iPhone Pro 14 Max for some reason, but I have not had any issues since then. I did wake the device up, so that was not the problem. For some reason it would not show up on my phone, and then after multiple restarts and power cycle of all devices involved, it just showed up and I was able to pair it.I currently use this indoors with Zwift. In my setup I'm using Apple TV 4k for Zwift, and the Zwift Companion app on my phone to pair all of my Bluetooth devices, including the Cycplus, a Wahoo Heart Rate Monitor and the Power and Speed sensors in my Wahoo Kickr Snap trainer. It's all working flawlessly. In case it helps anyone, you have to use the Companion app on a mobile device because Apple TV only supports two Bluetooth devices with Zwift, and I needed four.One last note: I use this in Cadence mode, and I have to say that it's really nice that unlike other inexpensive devices I have had in the past, you don't have to remove the battery to change modes. You simply turn the battery cover in one direction for Cadence and the other for Speed, and you get two different color flashing LED's signifying which mode you're in. Both modes are clearly marked on the back as well.
SithTracy
Reviewed in the United States on April 14, 2024
Seems to do a great job, and I felt they installed quite easily for a guy with 2XL hands trying to get your hand in to install the speed sensor through the spoke. I had nothing but headaches with the Garmen sensors, I was able to make the Wahoo ones work on my other bike, but these were easier to get in and I would consider them again.
Felix Wong
Reviewed in the United States on November 2, 2023
I purchased one of these for my indoor cycling sessions with the Rouvy app, and it connected seamlessly to my iPad Pro, working flawlessly. Impressed, I bought another one for my road bike used outdoors. The sensor, which activates automatically upon detecting movement, consistently and instantly connects to both my Garmin Forerunner 645 watch and Xoss G+ head unit. I use the former for recording my rides and the latter for quick, on-the-go data reading while cycling.I haven't encountered any issues with the sensor cutting out, turning off, or providing inaccurate readings during my rides. To the best of my knowledge, it works perfectly.
Recommended Products