Shopping Cart

Your cart is empty.

Your cart is empty.

Drill pump heavy duty for oil and fluids suitable for all drills TE472

Free shipping on orders over $29.99

$17.50

$ 8 .99 $8.99

In Stock

About this item

  • Sold on Amazon
  • For use with any power drill, electric, air or cordless
  • Please note; This pump is not suitable for pumping petrol
  • Good quality


Professional tool for commercial or occasional use.
For use with any power drill electric / air or battery (please be aware that the slower the drill though the slower the liquid will flow, wont work to its optimum capacity.
Suitable for all fluids and oils.
Fitted with an 6mm drill shaft so any 3/8" or 1/2" chuck will fit.
Maximum output of 1500 litres per hour working at a speed of 3,000 RPM
Maximum pumping height of 15 metres.
Maximum output pressure of 3 bar @ 3000 RPM.
Maximum height for pump above liquid to be pumped 300cm.
Self priming up to 30cm above the liquid.
The ends of the pump have 1/2" hose barb on. Hose can be fitted directly on and can be secured with a hose clip. however normally a hose clip is not necessary.
Please note; This pump is not suitable for pumping petrol. The pump would handle the fluid but there is a risk of sparks from the drill motor (even on air drills) so should not be used.


Kevin
Reviewed in the United States on February 19, 2025
Did not even last through the first use. Worked for about 5 minutes and then I noticed the liquid wasn’t flowing through the tube anymore ( clear tube). Next I saw the tube fill with smoke. And that was “all she wrote” as they say.
Rio Pena Tim
Reviewed in the United States on May 14, 2024
Got product for multi use. Removal of hydronic oil (over filling tractor), generator oil etc. So far has worked very well on hydronic fluid, plenty of suction both directions.
Joshua N.
Reviewed in the United States on September 21, 2023
Intailly this thing took forever to get primed up. I about threw it away cause it took so long. When it finally did it work great for what I was using it for.
J marshall
Reviewed in the United States on March 5, 2023
Very handy for differential/transfer case fluid changes. People complaining here bought the wrong item. This isn't meant for moving gallons of gas or water. Works perfectly for moving a few quarts of oil. It seems cheaply constructed so don't think it'll hold up to the rest of time but even if I get 100 uses out of it. Well worth it in place of hand pumping underneath a car for 10 minutes.
patrick lizotte
Reviewed in Canada on April 4, 2023
Sa ma prit 10.min pour remplir un 5 gallons d'eau
Philip Undewood
Reviewed in the United States on July 13, 2022
Pretty good little pump!!I transferred about 40 gallons of off road diesel over several times with this drill pump.Then last weekend I used the crap out of this thing while cutting 2 drive shafts on a damaged skid steer.I had a setup where I pumped diesel fuel across a Sawzall carbide blade while cutting 2 hardened drive shafts. I had a Milwaukee and Dewalt drill overheat and shut off after 2-3 minutes of constant use. It took about 4-5 hours of on/ off duty to cut these damn shafts.Pump never missed a beat.The drills and batteries overheated after 2-3 minutes (at 85F in the sun).The pump never missed a beat.I'm buying another one for moving clean fuel versus the 1st pump which I fear is probably contaminated with metal and junk from my cutting job.Definitely buy this!!!
Emmanuelle Sessler
Reviewed in the United States on January 6, 2022
Works alright, sometimes it can’t pickup the liquid but if you keep running it it’ll work. Pumps kinda slow and leaks at the shaft seal
D & D
Reviewed in the United States on June 3, 2021
Pros - Amazon delivered as indicatedCons - everything about this pump is junk. Look all pretty but does not work no matter how many ways you try to get it to work. I was attempting to us it as a gasoline transfer pump. Waisted my Money. Would sent it back to Amazon for refund but I got so mad at the junk, that I put a hammer to it up at my property when I tried to use it to transfer gas to my generator. THE END
Cleveland
Reviewed in the United States on October 28, 2021
I have used this to transfer used coolant from my drain container to the storage tank. I’ve used this same pump to transfer diesel fuel. Used different lines and “flushed the pump”. Also bought strainer screens that fit in a half inch line that work well for keeping garbage out of it. Good pump so far. Have pumped 50 gallons of coolant and 70 gallons of diesel fuel roughly with this pump. Works good for emptying diesel fuel tanks for service.
David Rand
Reviewed in the United Kingdom on August 22, 2020
My first impression was that this pump is too small to be any good, but I was wrong. It worked perfectly and didn't leak a drop from its seals.I needed to transfer ~500L of heating oil from various containers into drums, so I bought this TE472 drill pump, some half-inch rubber hose, and a pack of hose clamps. I fastened the last two feet of the intake hose onto a metal pole so that I could easily control where it goes (e.g. to the bottom of the source container), and I started pumping.At first I tried using my cordless drill, but it didn't spin fast enough. It initially moved some oil (slowly), but after I stopped to change batteries, the pump wouldn't even prime itself. I switched to a corded drill, which apparently spins much faster, and this pump worked great.Once I used a faster drill, the flow rate was somewhere just above 12L per minute, as I transferred 200L of oil in around 15.5 minutes. Overall I used this for just over 500L with no issues. I would highly recommend this pump for a project like this one.
Nolot
Reviewed in France on August 13, 2018
livraison rapide et produit satisfaisant
Richard Hanson
Reviewed in Canada on July 18, 2018
Bought this to remove water from toilets that we remove for work. After shutting off the water to the toilet and you flush, there was always a bit of water that would leak when your removed the toilet from the floor seal. This pump works great for removing the excess water! Works well and I've used it a half dozen times and fits in any 3/8 drill. Just have to remember to hold the pump while you spin the drill. I would buy again.
Margarete Möllmann
Reviewed in Germany on November 6, 2018
Alles prima danke