Your cart is empty.
Your cart is empty.FelPro gaskets offer 100% vehicle sealing with applicationspecific materials to give you sealing solutions with the performance and durability professionals trust
Matt Bryan
Reviewed in the United States on September 17, 2024
Very nice sbc gasket
twistedcedar
Reviewed in the United States on August 8, 2024
This is a great kit for a great price. Everything you need except a little rtv to re seal. The little blue corner snap things make this so easy. They hold up the pan too until you get a couple bolts in. No leaks yet. The high quality grade 5 black phosphate hardware is appreciated too.
Rob
Reviewed in the United States on August 27, 2024
Made replacing oil pan gasket easy as this gasket has hold ups that keeps it in place as you install the oil pan.
High adhession to gray RTV
Reviewed in the United States on October 31, 2024
Super hard to take off once you goop it down. Make sure to use the dowels even if you dont feel like you have to. These will seal up great. Mock it up dry, get the bolts ready on a table, lightly goop the entire block surface, place gasket on, lightly goop the top, install oil pan. Hand tighted everybolt starting from the center and then wait about 20 minutes and torque them all to final spec. Done and done
CHARLES
Reviewed in the United States on January 27, 2024
Good product fit great
Ally
Reviewed in the United States on May 14, 2023
I love these one piece rubber oil pan gaskets. However I learned to still apply RTV in the corners and around the complete front and back arches. I have had leaks here. These are leaps and bounds better than the 4 piece cork type.
Group Dski
Reviewed in the United States on November 17, 2023
Great value, delivered on time, fit was excellent.Fel-pro did an excellent job with this design.
P. MCGAFFEY
Reviewed in the United States on April 9, 2023
The instructions say to put this gasket on with NO sealant. It was a bear getting the SpeedMaster road race oil pan installed, even with the neat snap ups. Made several passes getting the torque correct on every bolt. First startup, while the car was on jackstands, produced drips from the front and back of the pan. Take it all apart, clean everything up, put it all back together with liberal coatings of Motorcraft TA-31 RTV on the front and back seals. Another whole day of work and the results were worth it, no more leaks!
Recommended Products
