Your cart is empty.
Your cart is empty.Genuine Fender string ferrules. Made for Fender.
Archemedis
Reviewed in the United States on January 21, 2025
They work fine
Archemedis
Reviewed in the United States on January 21, 2025
They work fine
OleDad
Reviewed in the United States on June 6, 2024
Haven’t installed them yet, but are good quality.
OleDad
Reviewed in the United States on June 6, 2024
Haven’t installed them yet, but are good quality.
goofball
Reviewed in Canada on June 18, 2024
My JBass was actually a top load bridge only then bought these ferrules priced well and bought a new bridge string thru body. Working as its should be fits very well my bass actual Fender UsA bass.
goofball
Reviewed in Canada on June 18, 2024
My JBass was actually a top load bridge only then bought these ferrules priced well and bought a new bridge string thru body. Working as its should be fits very well my bass actual Fender UsA bass.
Marty
Reviewed in the United States on December 19, 2022
These ferrules look good and were a perfect fit for my 2004 American Jazz bass.
Marty
Reviewed in the United States on December 19, 2022
These ferrules look good and were a perfect fit for my 2004 American Jazz bass.
Amauris Medrano
Reviewed in the United States on July 30, 2020
Al principio pensé que no se adaptaría a mi fender jazz Bass american Deluxe, pero es fue increíble
Amauris Medrano
Reviewed in the United States on July 30, 2020
Al principio pensé que no se adaptaría a mi fender jazz Bass american Deluxe, pero es fue increíble
Klem
Reviewed in the United States on February 28, 2020
Very solid, and well crafted. They are very tight fitting and have ridges so they don’t require any kind of adhesive to stay in place. You need to give them a good press to get them in. The nickel looks great.I used them on my Squier Jaguar bass to convert it to a string through. They are large even for bass ferrules. I included a picture of the front because I used ferrules in front too. They are a different brand that had a smaller external footprint. I included it so you can see a comparison in size.I used a drill press and a forstner bit to make all the holes. I practiced on scraps until I had the depth right.
Klem
Reviewed in the United States on February 28, 2020
Very solid, and well crafted. They are very tight fitting and have ridges so they don’t require any kind of adhesive to stay in place. You need to give them a good press to get them in. The nickel looks great.I used them on my Squier Jaguar bass to convert it to a string through. They are large even for bass ferrules. I included a picture of the front because I used ferrules in front too. They are a different brand that had a smaller external footprint. I included it so you can see a comparison in size.I used a drill press and a forstner bit to make all the holes. I practiced on scraps until I had the depth right.
Augusto P.
Reviewed in the United States on October 12, 2019
Perfect for my Amerian Deluxe Jazz Bass 4 2005 model (no active/passive switch).
Augusto P.
Reviewed in the United States on October 12, 2019
Perfect for my Amerian Deluxe Jazz Bass 4 2005 model (no active/passive switch).
SkiddlyDee
Reviewed in the United States on June 22, 2016
I needed to replace 2 of these on a used Fender American bass, these matched perfectly in color and size.
SkiddlyDee
Reviewed in the United States on June 22, 2016
I needed to replace 2 of these on a used Fender American bass, these matched perfectly in color and size.
WMan1234
Reviewed in the United States on July 29, 2015
OK - great quality. I got these for an Allparts 51 P-bass body and it turned out I needed the larger ones. I was able to fill the gap with some wood shims that I glued in using super glue gel (cut from popsicle sticks). They they fit in tight and no looseness. THese are for the newer style string through basses like the US series Jazz or P-bass. For vintage style you need to get larger ones that fit the slightly wider holes. Did not see those offered so went with these. They will work if you don't mind gluing in some shims.
WMan1234
Reviewed in the United States on July 29, 2015
OK - great quality. I got these for an Allparts 51 P-bass body and it turned out I needed the larger ones. I was able to fill the gap with some wood shims that I glued in using super glue gel (cut from popsicle sticks). They they fit in tight and no looseness. THese are for the newer style string through basses like the US series Jazz or P-bass. For vintage style you need to get larger ones that fit the slightly wider holes. Did not see those offered so went with these. They will work if you don't mind gluing in some shims.
Recommended Products
$15.34
$ 6 .99 $6.99