Your cart is empty.
Your cart is empty.4.5 out of 5 stars
- #43,603 in Office Products (See Top 100 in Office Products)
- #18 in Rotary Paper Trimmers
- #25 in Paper Trimmer Blades
Keep your Fiskars rotary trimmer performing at its best by replacing a worn cut bar with a new Fiskars® Replacement Rotary Cut Bar (28 mm). Intended to protect the rotary blade for a longer cut life, this bar can be rotated four times (two on each side) to maintain clean, precise cuts, and is compatible with Fiskars® 28 mm rotary paper trimmers (items 154480 and 199080).
KWT
Reviewed in the United States on February 22, 2025
If you have a 12" older Fiskars paper cutter like the one pictured, this rotary papercutter bar does not fit. The new white bar seems to be made of hard plastic, so you can't trim it down to the correct size.
Eileen
Reviewed in the United States on January 31, 2025
My very old paper trimmer needed a new cutting strip. I turned my old Strip three times, until it was completely cut through the strip. This was out of stock for a few weeks. This replacement saved me from having to replace my trimmer. The rotary blade lasts a long time before it needs replacing. Now with a new strip, it works like a new trimmer.
Amy Zierhut
Reviewed in the United States on May 21, 2024
Perfect replacement.
LouiseB
Reviewed in the United States on February 16, 2024
exactly what I needed for my older paper cutter to work; works beautifully now. appreciate the value (price and quality)
A.
Reviewed in the United States on December 22, 2023
I have a grey-and-orange Fiskars 12" Desktop 45mm Rotary Trimmer with a silver guide rail. It is 20+ years old, and the unit is not labeled with a model number of its own. Embossed on the bottom, it says it originally used the replacement cutting strip model number 9594. This cutting strip with model number 9582 (also known as 195820) fits it perfectly.
Laura
Reviewed in the United States on October 13, 2023
This cut bar was a perfect fit for my Fiskars Trimmer 154480. I got a lot of use out of the original cut bar even though it scores easily. I use this trimmer daily and I found that I can extend the life of the cut bar by lightly sanding it with fine fine grit sandpaper before the grooves get too deep. However, the price of this replacement is so good that I may not bother!
Boss Lady
Reviewed in the United States on July 21, 2022
These have two sides, and when flipped each half is usable. It's like getting four cutting strips! Being able to keep use my "old" Fiskars is the best part - if you prefer not adding to landfills.Everything considered, buying blades and these cutting bars I'm ahead of the game!I recommend these.
Kathleen L.
Reviewed in Canada on September 5, 2020
Fits the trimmer and works well.
Olga Ma. Mendoza E.
Reviewed in Mexico on December 7, 2019
Llegó en perfectas condiciones
C. Yann
Reviewed in France on July 28, 2018
Article d'origine du fabricant. Il y en a pour des années vu l'utilisation très modérée que je fais de mon massicot. Lorsqu'un côté est trop usé, on sort la règle*, on la tourne de 1/4 de tour et c'est à la seconde face de s'user et ainsi de suite 4 fois.A part la règle d'origine vendue avec le massicot, c'est la seconde fois que j'achète une règle depuis je pense une vingtaine d'année que 'jai acquis mon massicot Fiskars. Donc chaque règle m'a duré 10 ans environ .* J'appelle "règle" cette "bande de coupe " qui se présente comme une longue règle en matière synthétique noire à section carrée.
Dennis
Reviewed in Spain on February 25, 2016
Da una segunda vida a tu cizalla con la banda de corte original. Recomiendo cambiar también el disco de corte o no notarás mucha mejora.
CA Science Guy
Reviewed in the United States on June 2, 2013
A caution for using this bar:[I use this bar with my Costco purchased, black and silver colored 12" Rotary Cutter, 45mm cutting wheels; original replacement cutting bar number for this cutter is #9582. For a visual reference: a web search reveals that Walmart currently sells that model: http://www.walmart.com/ip/Fiskars-Titanium-10-Sheet-Rotary-Trimmer-Plastic-Base-20-x-13/21387752?srccode=cii_5784816&cpncode=30-192192684-2&adid=1500000000000029469730&veh=cse ]> One reviewer complains that the bar is a different material than expected, and already has a deep groove in it after a few uses.> Well, this bar is exactly like the bar that I was replacing, whether or not Fiskars has offered different materials at other times. This bar WILL develop a score mark after just one use, and it will deepen as more use is accumulated. The depth of the score mark will obviously depend upon how much downward pressure you apply while sliding the cutting wheel. This is the way the bar is supposed to work, and why it needs to have its cutting surface periodically renewed - by rotating to a fresh face, or by replacement. In a pinch - you can spend quite a bit of time and sand down the surface for some more life. Here's the issue you should concern yourself with...When you slide the cutting wheel mechanism to make a cut, the cutting wheel is free to wiggle a bit left and right. The basic issue is that with a casual cutting slide motion, there is nothing that constrains the wheel to move in an exact straight cut - it can wander a bit.This is a disadvantage of a consumer grade rotary cutter as opposed to a slicing guillotine blade cutter.> Solution: Especially for your first and earliest cuts on a new cutting bar surface: make sure that you while you slice, press the bottom (cutting) edge of the cutting wheel mechanism into the right side (outer guide edge) of the overhead cutting guide bar. This will force the cutting wheel to follow the straight edge of the guide bar. The cutting bar will develop its cutting groove - and that groove will be straight and parallel to the guide bar. Once the groove is in place, it will assist in keeping the cutting wheel in that same straight line track - resulting in straight edged cuts.> Problem: If you do not take care, and develop grooves in the cutting bar which are not straight and parallel to the cutting guide - you will find that for subsequent cuts, the cutting wheel will tend to follow the existing groove path. Pressing the wheel slide against the cutting guide in order to get a straight cut will now be less effective, as the wheel will be fighting to stay in its grooved track.SO - First: Get the initial cutting track straight - avoid later aggravation. Later on: always press the blade edge up against the cutting guide as you slide the cutter.
Bieu
Reviewed in Canada on November 22, 2012
If you have Fiskars cutter and start to notice that it isn't cutting well and you think it is the blade, and you change the blade it doesn't make much of a difference check your cutting bar. The nice thing is that you can rotate it 4 times so ues all four sides before replacing. Once I learned this my "old dull" blades worked great. After you have used all 4 four sides then you need a replacement. I ordered the replacement and it works great. Very easy to install.
Recommended Products
$116.38
$ 49 .99 $49.99