Your cart is empty.
Your cart is empty. Made of DuPont made with Viton.
Eliminates the need for replacing expensive valve and fuel line when only the O-ring is needed.
made with Viton lower O-ring for H-D check valves on fuel injected models.
This item fits the following vehicle applications:
compatible with Harley Davidson FLD Switchback 2012-2016
compatible with Harley Davidson FLHR Road King 2007-2020
compatible with Harley Davidson FLHRC Road King Classic 2007-2013
compatible with Harley Davidson FLHRCI Road King Classic 2001-2006
compatible with Harley Davidson FLHRI Road King 2001-2006
compatible with Harley Davidson FLHRS Road King Custom 2007
compatible with Harley Davidson FLHRSI Road King Custom 2004-2006
compatible with Harley Davidson FLHRXS Road King Special 2017-2020
compatible with Harley Davidson FLHT Electra Glide Standard 2019-2020
compatible with Harley Davidson FLHT Electra Glide Standard 2007-2009
compatible with Harley Davidson FLHTC Electra Glide Classic 2007-2013
compatible with Harley Davidson FLHTCI Electra Glide Classic 2001-2006
compatible with Harley Davidson FLHTCU Electra Glide Ultra Classic 2007-2019
compatible with Harley Davidson FLHTCUI Electra Glide Ultra Classic 2001-2006
compatible with Harley Davidson FLHTCUL Electra Glide Ultra Classic Low 2015-2016
compatible with Harley Davidson FLHTCUTG Tri Glide Ultra 2014-2016
compatible with Harley Davidson FLHTCUTG Tri Glide Ultra Classic 2009-2013
compatible with Harley Davidson FLHTI Electra Glide Standard 2003-2006
compatible with Harley Davidson FLHTK Electra Glide Ultra Limited 2010-2014
compatible with Harley Davidson FLHTK Ultra Limited 2015-2020
compatible with Harley Davidson FLHTKL Ultra Limited Low 2015-2019
compatible with Harley Davidson FLHX Street Glide 2007-2020
compatible with Harley Davidson FLHXI Street Glide 2006
compatible with Harley Davidson FLHXS Street Glide Special 2014-2020
compatible with Harley Davidson FLH
John Edge
Reviewed in the United States on September 2, 2024
The media could not be loaded.
John Edge
Reviewed in the United States on September 2, 2024
The media could not be loaded.
Ryan Thompson
Reviewed in the United States on August 15, 2024
Make sure you use a little grease. Luckily I ordered the pack of five. Ripped the first one. Cleaned the area and used a little grease on the make end. Take your time and ensure the O ring seats in the cavity.
Ryan Thompson
Reviewed in the United States on August 15, 2024
Make sure you use a little grease. Luckily I ordered the pack of five. Ripped the first one. Cleaned the area and used a little grease on the make end. Take your time and ensure the O ring seats in the cavity.
Andrejs Zurikovs
Reviewed in the United States on July 8, 2024
Leakage fixed.
Andrejs Zurikovs
Reviewed in the United States on July 8, 2024
Leakage fixed.
Okie69
Reviewed in the United States on October 21, 2024
Poor reviewers prior tried putting it in dry... I used a dab od Lucas red and tacky grease a small socket and dental pick easy as it can be just relax and guide it in slowly use the outside diameter of your socket to seat the ring using a circular motion 😅 shes dry as a bone
Okie69
Reviewed in the United States on October 21, 2024
Poor reviewers prior tried putting it in dry... I used a dab od Lucas red and tacky grease a small socket and dental pick easy as it can be just relax and guide it in slowly use the outside diameter of your socket to seat the ring using a circular motion 😅 shes dry as a bone
Jaxon
Reviewed in the United States on January 7, 2024
Exactly what I needed to get the bike back on the road. Harley will only sell you the entire assembly which is usually on backorder like all their parts. This little kit allows you to change lower ring pretty easy and had the bike back on the road in about 30 minutes to an hour. Didn’t have to drain the tank to replace either.
Jaxon
Reviewed in the United States on January 7, 2024
Exactly what I needed to get the bike back on the road. Harley will only sell you the entire assembly which is usually on backorder like all their parts. This little kit allows you to change lower ring pretty easy and had the bike back on the road in about 30 minutes to an hour. Didn’t have to drain the tank to replace either.
Shandahn Roundy
Reviewed in the United States on July 19, 2022
Just what I ordered. Came when advertised, fit perfect
Shandahn Roundy
Reviewed in the United States on July 19, 2022
Just what I ordered. Came when advertised, fit perfect
Axel
Reviewed in Germany on April 4, 2021
Toller Service, Dichtung passt perfekt und spart viel um Vergleich zur Harley-Lösung
Axel
Reviewed in Germany on April 4, 2021
Toller Service, Dichtung passt perfekt und spart viel um Vergleich zur Harley-Lösung
Fernando dominguez
Reviewed in the United States on July 31, 2020
worked well enough, took a few hours to finally seat in and stop the leak but it worked
Fernando dominguez
Reviewed in the United States on July 31, 2020
worked well enough, took a few hours to finally seat in and stop the leak but it worked
Customer
Reviewed in the United States on February 8, 2020
I was a bit worried about buying these o-rings based on some of the reviews. But I decided to go for it and give it a try. I had to use a dental pick to get the old o-ring out, and when I did, it came out in fragments. It was dried out and completely disintegrated when I removed it.I have a 2007 883XL Sportster and the new o-rings looked too small at first, but I figured I should at least try them since I had nothing to loose... I decided to lubricate the o-ring with some silicone lube I use for the o-rings in my swimming pool before installing. I am sure that a professional will tell me that is the wrong lubricant to use, but we are talking about such a small o-ring and a small surface area I figured it is probably ok. The new o-ring was a bit tricky to get into it's seat, but I was able to use a socket that fit perfectly into the check valve and that pushed the o-ring right into its seat without twisting it. I think this was also simplified because I didn't try to insert the o-ring dry. - I reconnected the fuel line, put the key in the ignition and flipped the switch to 'RUN' which pressurizes the fuel pump/line. Previously this would have _sprayed_ gasoline all over the place, but the new o-ring did the trick. Not a drop of fuel leaking from the check valve. I took the bike around the block a few times, and the assembly remained dry as a bone.So I have to give the product a good review. It worked as advertised and I really only needed 1 o-ring. So I have a pack of 4 spares to throw on the bench for the future.
Customer
Reviewed in the United States on February 8, 2020
I was a bit worried about buying these o-rings based on some of the reviews. But I decided to go for it and give it a try. I had to use a dental pick to get the old o-ring out, and when I did, it came out in fragments. It was dried out and completely disintegrated when I removed it.I have a 2007 883XL Sportster and the new o-rings looked too small at first, but I figured I should at least try them since I had nothing to loose... I decided to lubricate the o-ring with some silicone lube I use for the o-rings in my swimming pool before installing. I am sure that a professional will tell me that is the wrong lubricant to use, but we are talking about such a small o-ring and a small surface area I figured it is probably ok. The new o-ring was a bit tricky to get into it's seat, but I was able to use a socket that fit perfectly into the check valve and that pushed the o-ring right into its seat without twisting it. I think this was also simplified because I didn't try to insert the o-ring dry. - I reconnected the fuel line, put the key in the ignition and flipped the switch to 'RUN' which pressurizes the fuel pump/line. Previously this would have _sprayed_ gasoline all over the place, but the new o-ring did the trick. Not a drop of fuel leaking from the check valve. I took the bike around the block a few times, and the assembly remained dry as a bone.So I have to give the product a good review. It worked as advertised and I really only needed 1 o-ring. So I have a pack of 4 spares to throw on the bench for the future.
Recommended Products
