Your cart is empty.
Your cart is empty.Product Description
Enhance your home’s lighting controls with the GE-branded Wall Switch Outlet. The unique in-wall unit features a grounded, three-prong outlet operated by a built-in, single-pole toggle switch. This all-in-one power switch and receptacle configuration is perfect for any room in the house or for your garage or utility room. It fits conveniently in a standard duplex wallplate (not included) and provides a simple solution to regulating power to devices without ON/OFF switches. Rated up to 15A, the single-pole wall switch and outlet supports general household appliances and electronics without concern about overload. This product is intended to be used only with No. 12 or 14 AWG copper or copper clad wire. In addition to providing a reliable, easily controlled power source, the white finish easily integrates with your home’s existing outlets. Instructions are included to make installation a breeze! Take control of your electrical system with the GE-branded Wall Switch Outlet.
From the Manufacturer
Save space with the GE All-in-One Toggle Switch and Single Pole Outlet. This all-in-one power switch and receptacle configuration is perfect for any room in the house or for your garage or utility room. The switch is single pole and the receptacle is grounded for added safety. This product is intended to be used only with No. 12 or 14 AWG copper or copper clad wire. The switch is rated for 15A/120VAC max, and the receptacle is rated for 15A/125VAC max. It's simple to install and all instructions are located within the packaging. This product is UL listed and backed by a 90-day limited warranty.
Stephen Gilbert
Reviewed in the United States on March 1, 2025
Works great!
Sinan George
Reviewed in the United States on February 22, 2025
This product is not only easy to install, but also of excellent quality and a fantastic idea overall.
Customer
Reviewed in the United States on February 17, 2025
Thank you.
Colonel
Reviewed in the United States on January 1, 2025
I run a 14/2 from the box to the Attic, this switch fill the task, but the downside are the screws for the plastic box. They are cheap and they get rounded quickly.
David H.
Reviewed in the United States on August 16, 2024
My setup was a little different than most users. I wasn’t replacing a wall switch. I wanted an outlet that whatever I plugged into it, could be turned on and off with the switch. I wanted an outlet mounted on the side of my saw that I could plug the saw and vacuum into and turn them both on and off with one switch. I know it says to use Romex but I was making mine like an extension cord so I used a heavy extension cord. I hooked the white wire to the silver screw that said white and the black wire to the copper screw ON THE SAME SIDE. DON’T break the tab on the other side for this application. The side with the tab has no wires going to it. The ground to the green obviously. I used a small electrical bar to plug the saw and the vacuum into it and plugged the bar into the outlet/switch. Now with one flick, it all goes on. As far as people saying the switch is stiff, mine was perfectly fine. I don’t want a floppy, loose switch.
D Olson
Reviewed in the United States on December 5, 2024
Nice Quality, husband said it was a breeze to install and had it replaced in about 10 min. Great value for the money.
PCDoc
Reviewed in the United States on December 31, 2024
My remote for the the garage door opener (139.53960SRT, RED learning) does not working any more and there is no replacement unit. Tried a universal remote, same results. It appears the learning function no longer works.I purchased the Woodguilin Wireless Control Switch to solve my problem, and it did. The attaced photo shows the installation. Spent a lot of time researching for the correct installation instructions.Pigtail two wires (red & white) to the garage door opener wall switch that are connected to the Controller switch, white to com and red to no.I use a power adapter 120vAC to 12vDC, 1.5A to power the Controller's input port.To pair the Controller, push button 20 times quickly. Then press the button one time and wait a few seconds then press the remote button once. The Controller and remote should be paired. If they are not, repeat the process. Try to open/close the garage door and it worked.I used low volt staples (Garner Bender MSB-1540) to tack down the wiring.
Vic JR
Reviewed in the United States on December 27, 2024
Standard switch and outlet. Nice quality. I put this in the laundry room.
woody lacey
Reviewed in Canada on March 22, 2023
can not use
Customer
Reviewed in Canada on January 6, 2023
I like the packaging and also the easy guide for installation
Randy Huard
Reviewed in Canada on January 13, 2023
This product was exactly what I needed. It doesn’t feel cheap like a lot of electrical plugs/switches do. I replaced my existing furnace switch with this new switch in order to hook up a generator to the furnace. It works great. I recommend it.
Ray M.
Reviewed in Canada on December 7, 2022
No cover as is pictured
Bernard
Reviewed in Canada on December 22, 2020
produit tel que désiré et à temps.
Recommended Products
