Shopping Cart

Your cart is empty.

Your cart is empty.

Hakko CHP 3-SA Stainless Steel Non-Magnetic Precision Tweezers with Very Fine Point Tips for Microelectronics Applications, 4-3/4' Length

Free shipping on orders over $29.99

$13.67

$ 6 .99 $6.99

In Stock

About this item

  • Pattern 3 tweezers with very-fine point tips for use in electronics assembly
  • Non-serrated tip for delicate applications
  • Smooth shaft for general handling and positioning applications
  • Non-magnetic stainless steel construction resists corrosion
  • 4-3/4" (120mm) length


The Hakko CHP 3-SA pattern 3 tweezers with very-fine points have a smooth shaft for use in electronics assembly applications. The fine-point tips provide access to tight areas and are used for delicate precision work. The non-magnetic stainless steel construction resists corrosion. The tweezers is 4-3/4" (120mm) long.

American Hakko Products manufactures soldering and desoldering tools. The company, founded in 1984, is headquartered in Valencia, CA.


Austin G. Chamberlain
Reviewed in the United States on August 4, 2024
They’re cheap and work great, got as a suggestion from Lewis Rossman
Customer
Reviewed in Canada on July 6, 2024
These are very high precision, fine point tweezers. They have a great balance between flexibility, strength, and a fine point. They are precision ground at the tips, but are fairly delicate and somewhat fragile. Being a precision instrument, you have to take care in their use, so as not to abuse them on tasks not properly suited. They have sufficient strength for small to medium sized components, and if you're working under a microscope, these are the tweezers to have. I will definitely purchase these in the future as needed. Slightly expensive, but good stuff usually is. I buy two at a time, take care of them and they should last.
Theo
Reviewed in Canada on December 21, 2024
Used this to repair the movement on one of my old seikos. The precision tip was amazingly helpful.
Eldridge
Reviewed in the United States on January 26, 2022
I checked the dimension of my Hakko 3-SA. Length: 115mm (should be 120mm). Width: 9.6mm (should be 10mm). Tip thickness: 0.3mm (correct size). Dimensions as per Hakko website. If Hakko is cutting back on material and the size of their products, they must advertise correctly by US law if sold in the US. I am likely not to return them since they are sufficient for my needs, yet I can't help being a bit disappointed with my first pair of "precision" tweezers. This will influence further purchases.As far as "speed" of delivery, my order arrived at the carrier (USPS) on Dec. 30 '21. After several weeks, Amazon informed me my order was likely lost and I could request a refund, but I waited. My order arrived Jan. 25 '22. I don't believe Amazon or the 3rd party vendor are at fault for my order taking the scenic route, so you may draw your own conclusions.
Nemecio
Reviewed in Mexico on March 27, 2021
Utilizamos la pinza como herramienta de precision para trabajar en cierres de fibra optica.
Bill P.
Reviewed in the United States on September 18, 2020
You could use this to deal with ingrown hair and things like that but I used it to repair old, broken Sony Walkmen. The ends of the tweezers are very small and pointy which was great for fitting into the screw holes of the volume knob on an old Sony wm-2 from 1981. I was also able to get these really thin, small tweezers into tight spaces in electronics and pick up tiny screws. It was super valuable in stretching and installing a belt on a Walkman that was hard to get into because of how tight everything was packed together.Definitely recommend this. Very durable and well made.
Customer
Reviewed in Canada on August 5, 2020
Super sharp and precise compared to the cheaper tweezers. Great for fine smd work!
Nuclear Powered Finger Puppet
Reviewed in the United States on March 16, 2020
I got these after my Swiss Erem 3SAs went missing. I didn't want to spend that kind of money again. These, essentially, work just as well. They're not as sharp, the polish isn't as good, etc, but they're great quality and the price is way easier to stomach.
Pablo G
Reviewed in Mexico on March 12, 2020
Muy buena calidad. El agarre es muy preciso y el material muy sólido. No tuve problemas con el envío.
Josh
Reviewed in the United States on October 3, 2019
I read reviews of the tips being different sizes and them sticking to magnets... honestly, for the money they work very well. I work on watches as a hobby and these work perfectly. The tips weren't perfect when I got them but I cleaned the tips up with a glass file and then they became very pointed and even. The tips come together perfectly. As far as magnetic, of course a magnet sticks to them! But they themselves are NOT MAGNETIZED, thus the non magnetic remark. I would recommend.
Lucy
Reviewed in the United States on June 18, 2016
overall, for what you're paying for, it's a very good product.I use this for plucking eyebrow hairs and it works very well.Although, you have to get used to how this thing works to use it well. Only the very tip of this are touching each other, which means that if you grab a hair lightly, it has to be touching that tiny part in order to be plucked. However, I learned that if you press the handle hard enough, the hair will be plucked easily because more surface area at the tip are touching each other. so, after awhile, my hands get tired easily. But, it does provide more precision which i like about it.
Lindsey and Ron
Reviewed in the United States on May 12, 2016
I bought these and the 7-SA's, and I love them both. Very sharp points that come together perfectly. The points can get bent a little, but only after a lot of abuse (too much hot air from a solder air gun or too much heat from an iron). Even with the tips being bent slightly, I have been able to bend them back a bit. These feel really well made, and they feel like you’re holding a well made tool. They dont feel cheap like some of the other junk out there. Buy Hakko CHP's and you will never buy another brand of tweezer again.
Emily
Reviewed in the United States on June 27, 2015
Well worth the money. I was skeptical based on the price, but I bought these on the recommendation of someone that does component level rework on laptop motherboards for a living.These tweezers are very well made. Every surface is cleanly ground and has finished appearance. The tweezers have a very sharp point that comes in a protector and will grip even larger components, etc... very firmly. They will pick up the smallest item with ease. They seem very durable. I expect that they will hold up to quite a bit of hard work.
Recommended Products