Your cart is empty.
Your cart is empty.Constructed of durable, fiber reinforced composite Matrix material for a high-strength, low weight bottle cage with a great value. X-grip architecture and dual upper bottle catches ensure that bottles will stay in place. The wide opening in front allows for easy on the bike bottle access. The integrated low profile pump bracket is molded directly into the cage body while the Hook and Loop strap securely holds a lezyne high-pressure pump in place. The dual color artwork makes this cage sleek and stylish.
Customer
Reviewed in the United States on February 1, 2025
I like it. Getting a second one for long hot days. Wanted to try a single to see if held up. It does. No loss of bottle on rough terrain.
Jason
Reviewed in the United States on August 15, 2024
Light, durable and strong. Install was super easy and getting a water bottle in and out is even easier with the prefect positioned side open. No worries about the hold at all as it will hold a full bottle on the bike trails and ontop of your car at 90mph. Overall 10/10
TJ
Reviewed in the United States on November 14, 2024
Very light. Easy to access bottle from preferred side. Never had a bottle fall out even on extremely rough trails. Does scuff up bottles a bit over time, but all cages seem to do that in my experience.
Garrett G. Graham
Reviewed in the United States on October 1, 2024
The material is strong enough and lite enough to hold a small aluminum water bottle. At the same time the material is soft enough not to scratch up the finish on my aluminum water bottle. All of the aluminum ones are too ridged and too scratchy. The fake carbon fiber cages still seem to scratch the painted aluminum bottles. Going forward this is my go to water bottle cage.
dan
Reviewed in the United States on March 29, 2022
Works ok but the bottle needs to be small to fit. Tried to pull the holder apart to widen the aperture but was worried about it breaking.
BioBob
Reviewed in the United States on January 20, 2022
Right side - The bottle enters from the right side as you face the cage. When mounted on the seat tube, you need to use your left hand. Make sure you order the correct orientation for your setup. I ordered the wrong side and had to exchange it.I knew I needed a side entry cage because my new eBike is very tight between the tubes. I knew no cage would hold the lager Camelback bottles on my bike because of the lack of clearance above the mounted cage. I could expand the holes on this cage just a bit to drop it down. It holds a Polar Insulated bottle perfectly. Looks great, holds great and does the job perfectly for me.
Albert
Reviewed in Spain on February 24, 2021
perfecto para una botella pequeña, encaja super fuerte, no se mueve.
Oli
Reviewed in the United Kingdom on June 29, 2020
Bottle started falling out after a few weeks of use. Fell out while cycling without me noticing due to side-loading.
Ken G
Reviewed in the United States on November 7, 2020
The LEZYNE Side Load Flow Bicycle Bottle Cage, left or right sided, perform as promised - light weight, sturdy, easy to install, and providing quick access to your water bottle. By contrast, a top entry cage of any brand requires enough top clearance to pull the bottle out (without looking), but a cage on the seat tube might be too close to a tire pump strapped to the top tube to allow easy top access - enter the side load cage to solve the problem. One warning, a right-load cage is oriented for right side access when in front of you on the down tube. Move the same cage to the seat tube (under you) and it becomes a left side access cage (draw a picture or just trust me). So, if you are right-handed and want a side access cage on the right for your seat tube, buy the left access cage.Second warning is only for cyclists in the habit of picking up a latte or any other drink in a cup with collapsible sidewalls. I bounced a full 20-ounce latte out of the side access cage under my seat tube going over a low curb. Problem now prevented by either asking for a double cup to make it stiffer or by using a mini-bungie cord wrapped around the caged latte and the seat tube.
Crusoe
Reviewed in the United Kingdom on October 19, 2020
I bought this for my grandson's 7th Birthday for his new bike. His dad fitted it to the bike without any difficulty and the bottle I bought to go with it fits it well.
zoolander
Reviewed in Canada on July 3, 2019
does not grip bottle, slides out easily with a bump, the bottle does not sit flush with the cage either... side loading is a great idea, but badly executed for long term hold. the plastic is too flexible.
Rootman
Reviewed in the United States on September 24, 2018
A few sentences added to this products description would help it out a lot. This cage is not metal, it's a hard nylon like plastic.Both a RIGHT and a LEFT version are available, but that direction is dependent of where the cage is mounted. If you mount it to the downtube (the slanting tube right behind the wheel) a RH cage releases right, and LH version releases left as you are seated on the bike. If you mount it on the seat tube then they are reversed, RH releases left and LH on the right. They are opposite because the bosses face different directions. So if you get two of these to mount in a bikes triangle on an average street or road bike and want them to release on the same side, get one of each.Most all water bottles will fit this, however smaller bottles may not fit tightly and overly large bottles may fit extremely tight or not at all. It will fit most 'regular' bottles. Unlike metal cages there is no bending to tighten or loosen them. Some have sanded the outer lip a little to make then easier to release.I have an ebike with a battery on the downtube that makes the one and only bottle boss location on the seat tube, the boss is also a bit high to clear the battery so the old fashioned metal cages make it real difficult to pull or place the bottle, especially while moving. These work well. And look great. Good price too.
みねこ
Reviewed in Japan on March 8, 2015
女性用のフレームのため通常のボトルゲージでは上方向からボトルの抜き差しをすることがかなり困難だったたため、こちらの商品を購入しました。実際に使ってみて、横方向から女性の力でも問題のなく抜き差しすることができました。ボトルの固定力もキツすぎず緩すぎずほどほどで走行中に落下するということはなさそうです。フレームが小さく悩んでいるようでしたら、まずはこれを使ってみるというのは有なお手頃な商品だと思います。
Recommended Products
