Shopping Cart

Your cart is empty.

Your cart is empty.

Paintball Marker Straight Remote Hose Line 52' with Stainless Steel Quick Disconnect and Slide Check

Free shipping on orders over $29.99

$26.59

$ 12 .99 $12.99

In Stock

1.Color:Quick Disconnect


  • Safety is important, real high pressure hose, test blasting pressure 11516psi, working pressure 4600psi, 52inch length, straight hose.
  • With slide check, easy take on or off the air, not need disconnect from cylinder or marker. Quick disconnect Male ASA Adapter included, fits all markers.
  • G1/2-14 universal fill adapter, suitable for CO2, compressed air or N2 tank. The improved universal fill adapter makes it easy to operate and replace parts.
  • Stainless Steel Quick Disconnect with Slide Check, don't worry about the surface of copper nickel plating falling off after you sliding many times.
  • Polyurethane oring with hardness of 90Duro is used for key parts, which has better sealing and longer service life. It includes a complete set of orings for backup.



Product Description

Aopkeo, a new choice.

Aopkeo

From a 13 year professional manufacturer, more reliable.

This is a factory that has been established for 13 years specializing in outdoor sports products, located in Guangdong Province, China. We have done OEM for many internationally renowned brands. Now we have brought our products here and registered a new brand Aopkeo. We hope our products will bring you more choices.

mahua

8mm Nipple Adapter

8mm fill nipple and G1/2-14 thread adapter. To connect marker and hose. Made by aluminum alloy.

fill adapter

Universal Fill Adapter

Easy to install and disassemble, convenient for replacing seal o-ring. Made by aluminum alloy.

Quick disconnect

Slide Check

With slide check, easy take on or off the air, not need disconnect from cylinder or marker. Made by stainless steel.

QD

Quick Disconnect

8mm female quick disconnect, made by stainless steel.

high pressure hose

o-ring
Polyurethane o-ring

Using high-strength polyurethane as the material for quick disconnect o- rings, has a service life 10 times that of urethane material and can be used under a pressure of 6000psi.

  • High pressure resistance
  • Low temperature resistance
  • Good friction resistance
  • Easy installation

True High Pressure Hose

Safe is the most important, all of our hose are specially customized and can work normally under a maximum pressure of 4600psi/320bar. The test blasting pressure is 11516psi/794bar. You can use it with confidence under high pressure.

  • Outer diameter of hose: 0.34inch
  • Thread of the hose: 1/8npt
  • Maximum folding angle: 60°
  • Working pressure: 4600psi/320bar
ss

Stainless Steel Quick Disconnect

Ordinary copper nickel plated products, after many times use, the electroplating layer will fall off and the gap will scratch the o-ring in slide check.

Stainless steel surface,, never deform.

Universal Adapter Thread G1/2-14
Max Working Pressure 4600psi/320bar
Material of Quick Disconnect Stainless steel
Hose Length 52inches(straight), 100inches(coiled)

David J.
Reviewed in the United States on March 11, 2025
WILL BUY AGAIN
Irma y.
Reviewed in the United States on February 17, 2025
Producto muy regular llego con fuga manguera muy rígida mala inversión
Jam
Reviewed in the United States on May 9, 2024
The slide check leaked from the start. Thankfully they included all of the o-rings to rebuild this thing. However, it is really unfortunate that I had to rebuild a brand new one. That being said, the hose has good flexibility. The slide check is reasonably sized. I’m using this on an hpa tank attached to my tipx. The hose is long enough to be able to maneuver well, but not so long that it gets hooked on things or drags on the ground. Works well for me, just disappointed that I had to fix it before I could even use it.
Ryan Matthews
Reviewed in the United States on May 6, 2024
I ordered this specifically for running scenario/woods games as opposed to tournament/airball games and it fits the bill perfectly.The hose is long enough to reach the bottle holder in the rear pack, but not so long that it hangs up on branches and overgrowth and the quick disconnect comes in clutch when you need to swap markers mid-game. I did remove the connections at the on/off and at the hose attachment and applied a little bit of lock-tite just based on prior experience with remote lines and I highly recommend that you do this if you buy this product.Overall, this is exactly what I wanted, great quality and workmanship, and a perfect throwback to simpler times in paintball.
niki
Reviewed in the United States on December 9, 2024
Its second time i buy and return due to air leaking in on-off valve.