Your cart is empty.
Your cart is empty.4.4 out of 5 stars
- #1,507 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden)
- #7 in Pressure Washer Accessories
- #11 in Pressure Washers
ConcreteResurfacer
Reviewed in the United States on February 5, 2025
Bought this as a "just in case I need it" back in May of 2024. Well its Jan of 2025 and I need it. Now I can't use it. The inside diameter of the fitting on the end is too thick and the hose from my power washer wont fit inside. The original handle from the power washer is on the left/top in black. You can see the threads are correct (22mm I think) but the thickness of the I.D. won't allow the hose with the o-rings to fit inside the short handle. Hose fits in the black handle with no issues as seen in the pic. Tried going to a local plumbing supply, Granger, and even Home Depot to try and find a way to adapt it and no such luck. Also the brass fitting on the end of the red handle is soldered to the pipe inside that runs up the handle - was hoping I could just transfer the fitting from one handle to the other. No such luck. Cash in the trash.
jt01jtt
Reviewed in the United States on February 27, 2025
using this for car wash, especially for foam cannon. works very well
Tiffany
Reviewed in the United States on September 3, 2024
First time using a foam cannon, paired with my electric ryobi 1900psi pressure washer and I was able to get some great foam.This was the cheapest foam gun I was able to quickly locate on Amazon and I don’t know why people would spend double or more.Assemble to gun, attach to the pressure washer hose, filled up the tank half way with warm water (I did read warm water was a trick for better foam) added a few squirts of chemical guys soap and boom good to go. Can’t speak to the longevity, but the fun seems relatively solid, check out the pic for awesome foam.
YimYorn
Reviewed in the United States on September 16, 2024
Feels good to use and worked as intended. I do the plastic as the bottom attachment might break as it seems thin plastic but it hasn't yet. Overall, good for the price and used it at least 5 times and has held up. I store it away when I am done and dry it off.
shore time
Reviewed in the United States on July 10, 2024
Liked was brass and real metal. So far, very happy withgun and will continue to use.do not buy one of these if plastic,.RECOMMEND after 3 weeks ownership.Will update in future like 6-12 months to keep item on toes.RECOMMEND - remove tip when done so it does not get stuck to gun.Lubricate once in a while (every time put away) to keep partsmoving. I have seen these rusted and stuck together when people pull themout of shed following spring. Bad maintenance, so remove tip, shake out any water, shake, lube, go skiing.
Justin
Reviewed in the United States on December 26, 2024
I absolutely love this Sooprinse High Pressure Washer Gun! From the moment I unboxed it, I could tell this was a quality product built to last. The construction is sturdy and durable, and the attention to detail is evident in every aspect of the design.The cleaning power of this washer gun is truly impressive. With 3000 PSI of maximum pressure, it makes quick work of even the toughest grime and dirt. I've used it on my car, patio, and even some outdoor furniture, and the results have been outstanding. The different nozzle tips provide great versatility, allowing me to tackle a wide range of cleaning tasks with ease.What I really appreciate is how user-friendly this product is. The M22 hose connector makes it simple to attach to my existing pressure washer setup, and the ergonomic grip makes it comfortable to use for extended periods. The quick-connect nozzles are a game-changer, allowing me to switch between settings with just a twist.This Sooprinse High Pressure Washer Gun is an absolute must-have for anyone looking to take their cleaning routine to the next level. It's a true workhorse that delivers exceptional results every time. I cannot recommend it highly enough!
Adrian Parra
Reviewed in the United States on November 15, 2024
Great gun for the money,Plastic feels solid,Had it for a couple months and leaked a bit from the front,But tightened it with a adjustable wrench and fixed immediately,Great gun works fantastic ,Definitely worth the money.
Javier Varela
Reviewed in Mexico on October 12, 2024
Exelente producto
MIGUEL A.
Reviewed in Mexico on July 25, 2023
CALIDAD Y PRECIO MUY BUEN PRODUCTO LO RECMOIENDO A TODOS
Venandio
Reviewed in Mexico on May 14, 2023
Estoy satisfecho con el producto, cumplío mis espectadoras.Muy buen producto, precio y calidad.Perfecto para lavar mi vehículo; la entrega fue bastante rápido.Lo recomiendo
Customer
Reviewed in Canada on December 28, 2023
Works great, exactly as described. Quick delivery.
Oscar Ricardo
Reviewed in Mexico on January 22, 2023
funciona muy bien, se ve de calidad, no gotea a pesar de que uso una karcher de 1900 psi. muy recomendable
Dylan P.
Reviewed in the United States on July 27, 2019
I was definitely on the fence between keeping my original 2-3ft wand that came with the SunJoe SPX3000 pressure washer, upgrading to an MTM gun, or finding an affordable alternative like this. Well, after more car washes with the SunJoe wand, I decided to make a decision and buy this gun. Now realize that you need more than just this to connect it to some pressure washers, including the SunJoe:The hose coming off the SunJoe models has an M22-15mm fitting, different than a lot of other hoses and guns on the market, which either use an M22-14mm or 3/8" fitting. This gun has the M22-14mm fitting, so I needed to buy this adapter (Mingle Pressure Washer Coupler, Metric M22 15mm Male Thread to M22 14mm Female Fitting, 4500 PSI). It has the M22-15mm male end that goes into the SunJoe hose and the M22-14mm female end that goes into the gun side. A dab of grease on the o-ring, teflon tape on the threads, and tighten til it won't tighten anymore!The gun itself works as advertised and I don't notice any changes in performance compared to the stock wand besides being very short and easy to maneuver. There is 1 more adapter than stock, and the lack of swivel is troubling, but this is the same as the stock gun so I'm not really changing much besides barrel length. I plan to use this solely for car washes, so I'm ok not having a swivel or any fanciness. If I did this for a career, I'd buy a much nicer gun, get a swivel if it didn't have one, add quick disconnects, etc. For the home DIYer, this works perfectly fine and gets the job done. Foam cannon and stock tips fit into the gun quick connect.In the package, you get the gun, 5 tips of varying angles, an extra 0-ring for the tip's quick connect (which is removable and replaceable if you needed to), and nothing more. No instructions were included, though by the time I did a few hours research watching comparisons and videos about guns and the plethora of adapters I may need, I knew enough about how to assemble and use the gun.My couple complaints (minor) are that the trigger lock is flimsy and doesn't stay stuck to the trigger when using the gun, and the plastic construction feels a bit cheap. The claimed 3 year warranty by the seller is nice, though if the gun is used once every couple months for me, I probably won't need the warranty. First impressions are good, so will update if anything changes!
Recommended Products