Your cart is empty.
Your cart is empty.
- Model Number: ZST39 LR
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 4.75-5.25 VDC
- Z-Wave Range: Up to 1 mile in open space with Z-Wave Long Range enabled
- Operating Temperature: 14-104° F
- Installation and Use: Indoor only
- Dimensions: 2" x 0.8" x 0.3"
- Windows 2000, XP, Vista, 7, 8 (32 / 64 bit)
- Linux kernel 2.6.24+
- MAC OS X 6.4
Parynty
Reviewed in Poland on February 23, 2025
Działa z raspberry pi4 i home assistant. Bezproblemowe podłączenie do sprzętu. Na razie obsługuje dwa czujniki. Na razie żadnych problemów, żeby tak było zawsze 😀
Tim Jorgensen
Reviewed in the United States on February 2, 2025
Could not be any easier to integrate with HomeAssistant. Plug it in, recognized immediately, and took at firmware update via HA without any complaints. Immediately had moved all devices over from Smartthings in one night to HA using this stick.
Dragonkeyper
Reviewed in the United States on February 12, 2025
Need to add Zwave to my home automation, this was easily setup within Home Assistant.
Darryl
Reviewed in the United Kingdom on January 5, 2025
I bought this to upgrade and replace an Aeotec Gen500+ USB stick in a HA Yellow. Migrating a 66 node network in HA JSUI directly, or via nvmedit convert.Immediately updated to v1.4 before restoring a backup. World of difference! The network came back up as it should, and lightning fast. My mesh has now recalculated and has less hops/more direct node connections than before. I'm now running 100% on the Zooz USB stick.I had a disaster with unpingable/dead devices with the GPIO and total success with the USB stick, changing nothing else. I don't have a small z-wave network, but be warned on the performance. I'll be buying another ZST39 as backup and getting rid of the Aeotecs now.The GPIO 'may' be better if you only plan on using it with LR devices, yet untested by me. Use simplicity studio ideally or update with no nodes added, or you risk bricking the device - happened to me with the GPIO module.Check this before you do anything else, start with at least v1.4 before adding nodes as there are many issues in previous versions which this stick likely ships with.Looks like v1.5 of firmware will be released soon, and Silicon Labs claim all transmit lockups are fixed in that versions release notes. I see them rarely now on v1.4 and it's not bad like it was, so doesn't damage damage the mesh/automations reliability
YZFRider
Reviewed in the United States on January 28, 2025
This was easy to set up and across our 1800 sq ft single story home, it connects to every Z-Wave device I have. I run it with Home Assistant on a Pi.
Daniel
Reviewed in the United States on January 20, 2025
Just bought this for my Home Assistant. Works perfectly. Only have one device connected but have many devices on order. I guess I I could just use zigbee but a lot of zwave devices are what I need for some situations. They have plugs and switches where I can't find a zigbee variant.
Customer Review
Reviewed in the United States on January 2, 2025
The radio is long range, did not even have to buy an extender or such. I plugged this and it recognized my zwave devices just fine.
Yo...
Reviewed in Spain on September 24, 2024
No es la frecuencia europea estas son las especificaciones descritas..Especificaciones:Número de modelo: ZST39 LR.Frecuencia de señal Z-Wave: 908,42 MHz.Potencia: 4,75-5,25 V CC.Rango Z-Wave: hasta 1 milla en espacio abierto con Z-Wave Long Range habilitado.Temperatura de funcionamiento: -10.0-40.0 °C.Instalación y uso: solo en interiores.Dimensiones: 5 x 2 x 0,8 cm.
james burroughs
Reviewed in the United States on September 14, 2024
The value for the money was insane! Considering prebuilt hubs can run around $200 this usb stick is everything you need for zwave connectivity. I use it on my raspberry pi 4b 8gb with HomeAssistant and life couldn’t get much better. Everything is turned into a cross platform hub. If you like Google hub, Apple HomeKit, or the A-word you can set up your zwave devices to work with any of these. The durability of the USB stick seems well built. Connects to a standard USB type A port.
B. Stevens
Reviewed in the United States on December 7, 2024
Have had 0 issues with it. Setup was a breeze. The radio reaches super far and the connection has been very stable. Would recommend.
Customer
Reviewed in Canada on December 20, 2024
I'm a Home Assistant noob but this little thing was so easy to get going. Plugged it into my raspberry pi 4 and added 3 devices right away. Pretty thrilled to have my alarm.com zwave thermostat and smart plug local now instead of using telus' network.
Harrison
Reviewed in the United States on December 17, 2024
I purchased this Z-wave stick to add Z-wave connectivity to Home Assistant Green. This has worked flawlessly with my Z-wave devices for over 5 months now. So far there has been next to no lag on the devices. With several Z-wave sticks to choose from, I am very satisfied with my choice of this product.
Captain
Reviewed in Canada on December 16, 2024
Bought two of these, 1 in HA OS, another one in Pi with ZWave JS UI, both works perfectly with HA, I love home automation now
Recommended Products
