Your cart is empty.
Your cart is empty.Product Description
Product description :
External 8088 to internal 8087 adapter, will work both on the host and device side.
Supports External SFF-8088 26-pin Host Connectors
Supports Internal SFF-8087 36-pin Device Connectors
Supports up to 6Gb/s Mini SAS Data Transfer Rate
2 Ports SFF-8087 to SFF-8088 Adapter with Full PCI Slot Profile Mounting Bracket;
Package Includes:
1 x CableDeconn Dual Mini Sas26p Sff-8088 to Sas36p Sff-8087 Adapter in PCI Card Bracket
Supports external SFF-8088 26-pin host connectors
Supports internal SFF-8087 36-pin device connectors
Supports up to 6GB/s Mini SAS data transfer rate
2 ports SFF-8087 TO SFF-8088 adapter with full PCI slot profile mounting bracket;
Thomas H.
Reviewed in the United States on May 31, 2024
I was able to make this board work but I had to modify both the bracket and the card itself. I had to cut about 1/2" off the bottom of the board along with the lower bracket hole. The short bracket also has the retainer screw pointing in the wrong direction. If you don't feel comfortable making extreme modifications to the cards you put in your low profile computer then you don't want this card. It would probably work fine for full height card installation.
Jason A. Lari
Reviewed in the United States on January 18, 2024
First I will say that so far they working and doing their job well, but whomever designed them clearly never tried to install them into various styles of cases. First and biggest problem is that the low profile bracket is facing the wrong way. Low profile cases and brackets all have the screw hole on the other side and it's facing to the left, but this one has them designed like a standard height slot. Thankfully the small form factor case I installed this in won't be affected too much as I am only using it to store the drives that will be used, and it has no motherboard or any other cards.Second is I was not able to make this thing flush with the other computer I needed to use it on. The card is so tall in the wrong place and butts up against parts on my motherboard, no matter what slot I put it in. Same issue with the SFF as my other case has both types of slots. Thanks to the unique design of my second case, I was able to find a place for it in the full size slot, but not where I needed it to be, and I still sort of had to force it as the bracket has this little lip on it that was causing issues with hitting the plastic of my case, but that may be a problem specific to my case.So while they are working great, someone really messed up on the SFF brackets. I just do not know how they did not realize this.
Balders
Reviewed in the United Kingdom on August 14, 2023
Hooked up a NetApp DS4246 to an internal LSI 9207-8i SAS controller and just works.
Sayed Dheya
Reviewed in the United States on June 15, 2023
The bracket does not align properly, and it is NOT SUITABLE for use in a 2U server.It should also be noted, that the fastener on the top of the bracket goes to the right, not to the left (like every other card sold in North America). This will cause problems when used with other adapters.The card is designed so that when the low-profile bracket is used, the anchor flange hits the motherboard, preventing the bracket from properly seating the slot. This is a complete and total design failure.
Leslie
Reviewed in the United States on February 25, 2023
The adapter works great and allowed me to connect my external drive enclosure to an internal SAS card. I was unable to test throughput and drive performance however. This is due to me using a Dell PERC 710 raid controller. Evidently if the PERC card is configured by the firmware to be an internal card, you cannot connect them to an external drive enclosure. You will get a stop error of "Unsupported Configuration" and the computer will not boot. So please read the documentation for your SAS controller before purchasing this.
The Cli3nt
Reviewed in the United States on April 3, 2023
No complaints, works great
Jura Käufer
Reviewed in Germany on May 13, 2022
Es fehlt in der Produktbeschreibung der Hinweis, dass diese Slotblende nur in völlig freie Slots (hinter denen kein Mainboard ist) passt. Beim Fullheight-Slotblech ließe sich unter Umständen mit Dremel etwas nachhelfen (Siehe englischsprachige Rezensionen) beim Lowprofile-Blech jedoch nicht.Ansonsten funktioniert die Slotblende einwandfrei und ist zudem sehr preisgünstig.
Customer
Reviewed in Germany on December 28, 2022
If you’re planning to put it in a chassis with a motherboard it will most surely not work
No Name
Reviewed in Italy on February 23, 2021
connettori amphenol di buona qualità.provato solo con staffa full-size, hanno corretto l'orientamento dei punti di ancoraggio delle staffe half-size.effettivamente manca il "dente" al pcb in prossimità della staffa, quindi l'adattatore potrebbe toccare condensatori o componenti vicino al bordo della m/b in prossimità dello slot utilizzato per installarlo sul case
Dean
Reviewed in the United States on June 15, 2020
Works for SFF-8088 to SFF-8087, no issues. From the SFF-8087 port, I use a SFF-8087 to 4x SATA connectors and tested all of the connections and they are working perfectly.
Gabriele
Reviewed in Italy on June 16, 2019
articolo molto buono, prezzo non bassissimo però credo sia normale. non ho avuto problemi, nella confezione c'era tutto quello che doveva esserci! bisogna saperlo usare ovviamente. credo che lo prenderei di nuovo se mi dovesse servire! ottimmo venditore, spedizione come sempre impeccabile grazie ad amazon,
Zac
Reviewed in the United States on March 31, 2017
Using these to allow a single cable connection between a system and an external drive bay, rather than four SATA cables. I didn't need both ports (but checked both just to be sure), but I may expand my use for it later.Works fine, and having locking connections instead of eSATA (that can just fall out) is a confidence booster.
Brian M
Reviewed in the United States on September 22, 2016
This turned out to be a great value for us. We were able to reuse existing internal HBAs using this by giving up just one unused external slot which was not a problem with our server hardware. Containing both the regular and small form factor brackets saves a good bit of money as these can add up if you need to purchase them individually. We saved at least half by using these with existing internal cards over buying new built in external cards. This made the purchase price a total non-issue so we added a few more to the parts box just in case.
Recommended Products
$63.76
$ 30 .99 $30.99