Your cart is empty.
Your cart is empty.Product Description
- Functions:
- Kayak pad eye is perfect as a deck loop or tie-down for Kayaks, roped accessories and many other uses
- Rivets with black powder coating and waterproof gaskets, for mounting hardware where you don’t have access to the back side of a fastener
- The waterproof rubber washers help in making the drilled hole water tight from water that might splash on to the accessory being fastened by these rivets
- Package Included:
- 10 PCs kayak pad eye
- 20 PCs Tri-Grip rivet kit for kayaks with waterproof gaskets
Kayak Pad Eyes with Rivets kit
This kit cooperation with your other kit that can help fix the storage room goods of the kayak and the corresponding position of the hull
To make be a useful kayak bungee deck loops kit that can replacement for kayak, help to fix the goods /items during transportation
Suitable for your kayak paddles, Boat, canoe paddles, fishing rods and other items that need to be fixed on the boat
20 PCs 3/16" Tri-Grip Rivet kit
The Tri-grip rivet is Aluminum body with aluminum mandrel, all aluminum No plastic.
Sturdy, strong and durable, corrosion resistant, hard to damage
10 PCs Kayak pad eyes
Kayak pad eyes are made of durable POM plastic, providing 1/2" across and 3/8" high attachment points for seats, leashes, kayaks, roped accessories and many other use etc
Waterproof Rubber Gaskets
With waterproof gaskets, for mounting hardware where you don’t have access to the back side of a fastener, sturdy, strong and durable, corrosion resistant, hard to damage
Rivet grip range 1/6"-1/2 ". 3/16" in diameter.
Kayak Deck Rigging kit
These rivets kit will work great on almost any application on kayak like rod holders, pad eyes, terminal ends, handles, etc. And shipbuilding, containers, industries construction, automobiles, furniture appliances and more
With tie-down pad eyes can add a large amount of storage to your watercraft, perfect for long trips. Will fit on bow, stern, or the front of your cockpit
peter
Reviewed in the United States on September 25, 2024
Not installed yet looks sturdy
Eliott Birke
Reviewed in the United States on August 20, 2024
I needed some tether points for my Pelican Mustang 100x, because it didn’t come with any. I was able to lift the kayak with only the two on the front and back. I haven’t had any problems with leaking or any problems with them at all. The rivets are a great alternative to screws which can stick out in the way or be sharp. They were very easy to install and so far I am very happy with them. Would buy again!
Pequeño, practico y seguro
Reviewed in Mexico on August 17, 2024
Buenos, bonitos y baratos. Da todo lo que necesitas para hacer ese proyecto en la embarcación
Sandy
Reviewed in the United States on June 3, 2024
These fasteners were easy to install on our sit on top kayaks for adjustable seats; would recommend.
Terry B
Reviewed in the United States on June 25, 2024
I liked the sturdiness of the product and the rivets attached perfectly to the Kayak and seem to be very secure. Used to attach a new seat and was a great improvement.
Customer
Reviewed in Canada on May 30, 2024
comme original sur un kayak
kathryn kamay
Reviewed in the United States on December 23, 2024
They work great on kayaks
TallerThanAverage
Reviewed in the United States on November 18, 2024
First time installing something like this on a plastic kayak. I picked a drill bit that was just slightly small so that the rivet was an interference fit, to reduce wiggle room and maybe less liklihood of any water infiltration.I put the O-ring between the boat and the rivet (not between the rivet and the padeye as in the marketing photo) because that's the interface that actually requires sealing. Once the rivets were secured the O-ring was compressed significantly.My pop rivet 'gun' took two presses to completely seat these rivets.Wasn't sure how strong the padeye would be but it FEELS very sexure; easily lifted the weight of one end of a large tandem kayak with no noticeable wiggle.
rjb
Reviewed in the United States on August 30, 2023
I installed 3 of these on a couple kayaks to hook up a brush clip to. I tested it outside the water and yanking hard on the eyes after riveting them down proves to me they're on there snug. For 10$ these are sweet. They come with silicone washers to keep the rivet watertight, and they're very easy to install. Use a 3/16 bit through the eye mount hole to start, then finish the hole, place one rivet in. Repeat in the other side then swivel it away and finish that hole. Insert both rivets and crank them down. Took me about 10m to do 3 of them.Recommend for the $, real cheap way to add some eyes to any kayak, especially without access to the underside.
Matty
Reviewed in Canada on August 14, 2023
Easy install, strong hold and look clean!
michael j cloud
Reviewed in the United States on December 6, 2023
My kayak need more tie-down locations and the served the intended purpose. I ended up using screws and polybutylene sealant as the rivets were inadequate, even with the sealant. I guess the kayak wall thickness is either too small or too thick since the first good yank on the cleats popped a few of them completely free. So, stainless steel screws and poly sealant. Still recommend both the product and the supplier!
Arturo A.
Reviewed in Mexico on February 4, 2021
Materiales de buena calidad, idénticos a los que vienen instalados de fabrica en el Kayak, fáciles de instalar¡, los remaches funcionan a la perfección, muy satisfecho
Recommended Products
$12.88
$ 5 .99 $5.99
$25.99
$ 11 .99 $11.99