Your cart is empty.
Your cart is empty.Product Description
- This gas meter is connected to hose to measure unidirectional gas flow.
- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
- It is simple to use, and has 8mm barbs for convenient connection to hoses.
- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc.
- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
LZQ-2 0-3LPM
Specifications:
- Material: Acrylic+plastic+metal
- Connection: 8mm hose barb
- Accuracy: 5%
- Range: 0~3LPM
- Pressure: ≤0.6MPa (recommended 101.3KPa)
- Temperature: 0~60°C
Package Includes:
- 1 x Gas Flowmeter
LZQ-7 2-20LPM
Specifications:
- Material: Acrylic+plastic+metal
- Connection: 8mm hose barb
- Accuracy: 5%
- Range: 2~20LPM
- Pressure: ≤0.6MPa (recommended 101.3KPa)
- Temperature: 0~60°C
Package Includes:
- 1 x Gas Flowmeter
LZQ-7 1-10LPM
Specifications:
- Material: Acrylic+plastic+metal
- Connection: 8mm hose barb
- Accuracy: 5%
- Range: 1~10LPM
- Pressure: ≤0.6MPa (recommended 101.3KPa)
- Temperature: 0~60°C
Package Includes:
- 1 x Gas Flowmeter
LZQ-5 2.5-25LPM
Specifications:
- Material: Acrylic+plastic+metal
- Connection: 8mm hose barb
- Accuracy: 5%
- Range: 2.5~25LPM
- Pressure: ≤0.6MPa (recommended 101.3KPa)
- Temperature: 0~60°C
Package Includes:
- 1 x Gas Flowmeter
Chris Udoaka
Reviewed in the United States on February 20, 2025
Great
Edgar Tenorio Salazar
Reviewed in Mexico on December 5, 2024
Lo compre como refacción ya que necesitanmba la perilla nada más
Efrain
Reviewed in Mexico on February 26, 2023
Excelente servicio y funciona bien el aparato
Rafael Meza Yela
Reviewed in Mexico on February 1, 2023
Producto de buena calidad, orden se procesó en el tiempo acordado.
butch
Reviewed in the United States on November 24, 2023
Received on time and good condition. I bought this to check the flow from my oxygen concentrater. I have copd and needed to know. What the oxygen flow was at the end of a 50 foot hose.
Marshall Vinje
Reviewed in the United States on November 1, 2023
I had a barb break so i need to replace one with a smaller barb What size threads on the barbs?
Lorraine P
Reviewed in the United States on February 21, 2022
No directions on how to use. I bought this for my oxygen concentrator so that I could turn the oxygen levels down when I was far away from it but I didn’t know how to use it in my oxygen tubes would not sit on it so I had to return on it
Customer
Reviewed in the United States on February 15, 2022
Couldn’t get it to work.
Charles Bates
Reviewed in the United States on January 28, 2022
This flowmeter has the right range, but it is hard to mount because the inlet and outlet ports are on the back. It would be helpful for most users to have the ports 90 degrees from the face of the meter.
PR from Colorado
Reviewed in the United States on January 11, 2022
I bought this meter to use with Ar for TIG welding. I'm used to fine equipment for gas handling at work, and the Chinese made "flowmeters" that sell here for TIG welding just were like, no way, I'm not doing that. I bought this meter, and a welding quality regulator, and it was rough and unstable. So I bought an AirGas pressure regulator, a two-stage laboratory quality one, and this meter. The second stage pressure is rock solid at 10 psi, the needle valve is fine for flow tuning, and my Ar flow is so stable, the ball in the meter doesn't even move, looks like it is frozen. This is how your TIG flow is supposed to be folks. I recommend this meter if you use TIG with flows from 10 to 20 CFH (of course, you have to know how to multiply by 2 to get LPM to CFH :)
Ed & Judy.
Reviewed in Canada on September 5, 2021
Worked perfectly.
Robert L. Hurley
Reviewed in the United States on October 31, 2021
I have attached the flowmeter to the 50 ft of tubing attached to my oxygen concentrator. The out side is attached to my cannula that delivers oxygen to me. I use it to remotely change the oxygen flow up & down as needed. While the flowmeter does work well for this purpose, it does get accidentally changed up or down as I move around.Could you develop a lock/unlock feature in the flow knob to eliminate the unintended changes caused by my moving around?
Jack McArthur
Reviewed in Canada on January 1, 2021
Used as an oxygen Iron remover that was sized wrong, I need to manually regenerate to do correctly (I have low flow rate) This flow meter fills with water because it will not stay vertical. I need to rurn off water flow to house pump, let pressure build up and then mazzie works if the flow meter had not filled with water.
Recommended Products