Your cart is empty.
Your cart is empty.Product Description
How to read the meter?
8 digit register counter. The 1st digit from the right is in one tenth gallons (*0.1 gallons). The dial is in one hundredth gallons(*0.01 gallons). if you see 0000123.4 on register, it is 123.4 gallons.
Upgraded to AS200U-75P for Simple Remote Reading Solutions
With CO-10 or CO-10 KIT, you can read the water meter usage remotely on the electrical pulse counter.
Upgraded to AS200U-75P for Cloud Metering for Water
1 AMR130AN KIT + 1 CC2030 KIT
1 DAE CC2030 KIT Gateway + 1 AMR130AN KIT can read 1 water meter with pulse output (like DAE AS200U-75P, MJ-75, PD-75, V-75P, VM-75P and WP-300P) remotely with cell phone, PC and generate billing report. One CC2030 Gateway can monitor 20 meters (water, electricity, and gas).
1 AMR130-RN KIT+1WSC500A + 1 CC2030 KIT
For existing building, hard to draw cable between AMR130AN and CC2030, please choose 1 AMR130-RN KIT + 1 CC2030 KIT + 1 WSC500A to connect them wirelessly.
For remotely monitoring a water meter in an area without power like the one in the farm, please choose CC2030 KIT+AMR130RB+WSC500A to connect Battery-Powered AMR130RB (close to water meter) and CC2030 (close to your router) wirelessly.
1 AMR KIT + 1 CC2030 KIT
For monitoring up to 16 water meters remotely with cell phone, PC and generate billing report, you will just need 1 AMR KIT + 1 CC2030 KIT.
1 AMR KIT+2 WSC500A + 1 CC2030 KIT
For existing building, hard to draw cable between AMR (close to water meter) and CC2030 (close to your router), please choose 1 AMR KIT + 1 CC2030 KIT+ 2 WSC500 RF Converter to connect them wirelessly.
Back Flow Prevention Valve
You must have back-flow-prevention valve in your piping system, or the reading of CO-10, Cell phone/PC may be more than the reading of water meter due to the backflow. Non-Return-Valves (like NRVAS-75 for AS200U-75) are available in DAE Controls Website, an in-expensive backflow prevention valve to be installed at the outlet of water meter.
UL2464 Shielded Twisted Pair Cable with Drain Wire, 24 AWG
To securely transfer metering data for DAE Cloud Metering Solutions on Water, please use UL2464 cable to extend connection between water meters (have about 4 ft pulse cable) and AMR130AN, or reading of Cell phone/PC may be more than the reading of meter due to exterior interference. With UL2464 cable, connection between meter, AMR130AN can be extended at least 328 ft, and at least 2000 ft between CC2030 and AMR130AN.
DAE B1725 Plastic watertight NEMA 4 IP66 Universal Electrical Enclosure with Mounting Plate
Indoor use only, DAE B1725 watertight enclosure is available for outdoor use.
Milton Alarcon
Reviewed in Canada on September 12, 2024
Bon produit, utile
Dexter
Reviewed in the United States on June 27, 2024
Good little meter that's easy to install and records fairly low flow rates.
RBMoose
Reviewed in the United States on December 5, 2024
I'm on a well, and I wanted to know how many gallons of water I use and between filler changes.
Ruth Carroll
Reviewed in the United States on December 18, 2024
Works great. Very accurate.
azon Customer
Reviewed in the United States on November 20, 2024
Leak detection in a crawl space
Joe G
Reviewed in the United States on October 2, 2024
Installed indoors per the instructions. It works great.
OregonBorne
Reviewed in the United States on November 27, 2023
This meter arrived quickly, and in good shape. It's made of heavy brass (as it should be) and feels like good quality. I've seen a lot of other reviews complaining about the fittings -- and people having difficulty with making good plumbing connections... to which I would say "probably user error". In a former life, I worked as a small water system operator for several years -- and I have experience with this type of water meter. The fittings on this model are standard. You'll want to be sure to use the 2 brass 'adapters' when you install the meter (they aren't 'optional'), and don't forget to put the rubber washers in when you attach them to the meter inlet and outlet ports. After that, you'll have brass male threads pointing in both directions (upstream and downstream) from your new meter -- and these threads are in the nominal size you specified when ordering (mine are 1" male pipe threads or MPT). From here, you will need to purchase the appropriate fittings to connect to your plumbing, with a corresponding female pipe thread (FPT) in the same nominal size. For me, it was a pair of 1" PVC couplings, slip x FPT -- because I was adding the meter into a section of 1" PVC pipe. [Please note: connecting brass or metal MPT into plastic FPT is never recommended, because the plastic fitting can crack as you tighten into it. I did it very carefully.]I have had the meter in service for about a month now (3500 gallons) and everything appears to be working properly. Never did an accuracy test -- but other reviewers have said it's pretty darned accurate, which is good enough for my purposes.Don't overlook the warnings about orientation... I guess this meter MUST be installed horizontally and flat, with the dial facing up. I don't know what happens if you do something different. And I don't want to know.Good luck! :)
Christine
Reviewed in Canada on August 9, 2022
Bought this one to replace crappy save a drop ones I had before. So far working great, and I have no doubt will last longer than the previous water meters I bought. Shipping was expensive but hopefully pays for its in quality.
Customer
Reviewed in the United States on May 1, 2022
I simply needed a solid, quality meter to put on a garden hose. Searches always resulted in either A) Cheap plastic meters or B) $100+ metal meters. This was like 40 bucks and is *extremely* solid and well made. It works perfectly. I measured the accuracy and it is accurate. Keep in mind that with this meter you: 1) Will have to buy the adapters for the garden hose, 2) need to lay this device flat while it is in use (I haven't tried tilting it to see what the effect is but was just following their instructions) and 3) Realize that this is a "forward only" meter so you can't reset it with each use so you will have to make note of the reading before use and do a tiny bit of math. I knocked a star of the "Easy to read" because the meter comes with parts/adapters you may not use and the instructions don't make it clear which to use to connect to the hose.
Michael Ross
Reviewed in Canada on August 9, 2020
Very good meter
Martin Yarema
Reviewed in Canada on August 14, 2018
Now I can keep track of well water used and know when to change my filters.
Customer
Reviewed in Canada on April 10, 2018
Easy to install good quality. Very accurate tested with 5 gallon pail. Would recommend
RevDrRon
Reviewed in the United States on May 26, 2017
Great little meter for the money. I bought it to measure the water used by my new water filtration system. Filters need to be replaced when so many gallons are used. Since only drinking water is purified, I needed a way to monitor the amount going through the system.This is a well made, solid brass lead free meter, and can read to 0.01 gallons. You may say "why do I need to measure to the 0.01 gallon?" Well, you certainly do not have to, but this feature can tell you if you have even a very small leak. The wheel spins at the slightest fluctuation in water flow, backwards or forwards.It also was easy to install with no leakage problems.
Recommended Products
$184.00
$ 72 .99 $72.99