Your cart is empty.
Your cart is empty.4.5 out of 5 stars
- #3,577 in Musical Instruments (See Top 100 in Musical Instruments)
- #14 in Recording Studio Rack Accessories
Product Description
- JINGCHENGMEI's professional team design products to meet your standard 19-inch equipments according to EIA/ECA-310-E.
- Besides product's quality, reliability and compatibility, we are striving to optimize product structure and packaging to make products safer and easier in transit !
Unit Separation Mark for a Easy Installation
- In Order to Mount the Equipments onto the Rack Rails easily, Unit Separation Marks are Added onto the Rails.
Equipped with Mounting Screws
- Including Enough Screws for Mounting your Equipments onto the Rack Rails.
Equipped with Installing Screws
- Including Enough Screws for Installing onto the wooden frame.
- Tip: Pre-drilling Bottom Holes with a Diameter of 3.5 mm on Wooden Frame Making Installation Easier.
Triangle Tapping Screws for Mounting Equipments onto the Rack Rails
Mounting onto Rack Rails
- In Order to Install your Equipments onto the Rack Rails Firmly, we don't make the thread on the Rack Rails when production.
- No Need to Thread the Rails Specially !
- The Triangle Self-tapping Screws Can Automatically Tap the Internal Thread in One Step While by Electric Screw Driver.
Installation Screws
- The Screws are Characterized by Low Screwing Torque are High Locking Performanace. Your Equipments will be Fixed onto the Rails Firmly.
Wooden Frame Installation Size
- 4U Rack Rails: Wooden Frame Needs to be more than 183 mm
- 6U Rack Rails: Wooden Frame Needs to be more than 272 mm
- 8U Rack Rails: Wooden Frame Needs to be more than 361 mm
- 10U Rack Rails: Wooden Frame Needs to be more than 450 mm
Makros
Reviewed in the United States on January 27, 2025
These affordable rails are pretty simple and lightweight compared to the big industrial data-center racks. But that's why I got them. I just want to put together a simple mini half-rack to hold a few Raspberry Pi's and some prototype boards. The kit even comes with a few extra screws: 4 wood screws, and a handful of M5 rack-mount screws. My other rack uses 10-32 size threads but close enough for rough prototype purposes.
D. Parent
Reviewed in the United States on January 1, 2025
Perfect rack rails. Quality coating. Plenty of screws. Perfect for a rack build for my music production desk
Jack A. Loganbill
Reviewed in the United States on August 20, 2024
These brackets, wood, glue, is all you need to make your own rack mount cabinets, etc. I purchased two sets to build computer monitor stands that will contain a few 1U rack mount devices. I should have purchased the 4U brackets, but that's another story. Comes with the brackets, mounting screws (too long for 3/4 sides), and plenty of the rack mount screws. Works great, decent price.
Smoka J
Reviewed in the United States on November 7, 2024
Fast shipping! Works good!
Heiko F
Reviewed in Germany on October 21, 2024
Bohrungen mit Gewinde sehr ungenau die Farbe ist total billig. Schrauben sind die schlechteste Metall-Ausführung die es gibt.
Customer
Reviewed in the United States on October 1, 2024
Used these to clean up the sound booth at our church, used some 20/20 aluminum extrusion to mount them to and it holds the amps
Dav Mar
Reviewed in the United States on September 30, 2023
I've purchased rack rails for years and have never before encountered such a flimsy product. They are constructed of an extremely lightweight steel. Although they are likely adequate for moderate loads, a major concern would be the threaded holes. I doubt that there would be more than one full thread of engagement of the rack screws with the rails. Mechanical design principles specify that the minimum engagement should be three threads. In addition to the rails the supplied rack screws are not provided with nylon washers. Mounting equipment without the use of a plastic washer is instant rack rash on the unit front panel around the mounting holes.
Vincent Riso Jr.
Reviewed in the United States on December 13, 2023
Was not pre threaded
Tilo Metzner
Reviewed in Germany on January 29, 2023
Ian
Reviewed in the United Kingdom on October 5, 2022
These are rubbish, i have installed these into a standard 19” rack housing however they are not as wide as they should be in order to fit 19” units onto them. Should also point out that they use screws included to fix items onto them and as such standard rack nuts and bolts do not fit. These are not much use for anything besides recycle
Just Me
Reviewed in the United States on October 11, 2022
The drill pattern is pretty bad... They did not line up with the screw alignments on my devices... This worked out ok for how I am using it, but if it was going to be in a mobile rack, I would have returned them. Other than that, they are heavy duty and worth the money, but I would not use these for a Road Rack.
Zye De-Martine
Reviewed in the United Kingdom on January 23, 2022
To anyone reading the other reviews leaving negative comments, ignore those.These are easily more than adequate for any equipment being rack mounted. The steel is perfectly thick enough and not flimsy in the slightest. As for the holes not being pre-threaded, that is why it is supplied with self tapping screws.An if they are not good enough you could always "tap n die" the holes already drilled out, to give them a thread.10/10
Regis Lefevre
Reviewed in France on October 4, 2021
Les trous ne sont pas filetés. Apparemment, en forçant les vis ca forme un filetage mais ca doit pas être très propre. Sinon il existe des écrous enfermés dans une cage clipsable, ca existait sur des vieilles baies. Mais du coup, les vis fournies sont trop grosses....Bref, prévoir votre visserie. Sinon, les grosses visses à bois fournies pour les côtés peuvent suffir pour racker du matériel léger, ça tient à peu près, en attendant de trouver mieux.
Recommended Products