Shopping Cart

Your cart is empty.

Your cart is empty.

Kable Kontrol Heat Shrink Tubing - 3/16” Inch - 50' Ft Long, Black Polyolefin - 2:1 Industrial Shrink Tube & Cable Sleeve for Electrical Wire Insulation

Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock

1.:0.046 Inch (3/64) - 10 Feet


2.:Black


  • DIMENSIONS: Size: 3/16” Inch | 2:1 Shrink Ratio | Color: Black | Length: 50 Ft | Material: Polyolefin
  • APPLICATION: Used for Electrical Insulation, Wire Bundling, Color Coding, and Wire Strain Relief Etc
  • RoHS COMPLIANT: Self-Extinguishing Polyolefin Electrical Wire Shrink Tube is in Compliance with RoHS
  • DURABLE: Heat Shrink Tubing is Flame Retardant (Except Clear Color) and also Chemical, Oil Resistant
  • TECHNICAL SPECS: Operating Temp - 67℉ to 275℉ (-55℃ to 135℃) | MIL Spec AMS-DTL-23053/5: 105 and 305



Product Description

kable-kontrol-heat-shrink-tubing-2-1-cable-sleeve-banner

Kable Kontrol is among top leaders in cable management industry providing diverse range and top-quality wire and cord management products. The 2:1 heat shrink tubing is one of the most in demand product because of its unique features which includes it being flame retardant shrink wrap (except clear color), shrink-tubing resistant to chemicals and oil retardants, and also shrink tube being in compliance with RoHS and is also UL Listed (File no E536025) . Additionally, the heatshrink reduces to the half of the original diameter when heated. This industrial heat-shrink tubing comes in wide range of diameter and lengths, i.e., from 0.046” inches to 3” inches lengths and 10 feet to 500 feet.

2:1 Heat Shrink Tubing
Kable-Kontrol-Heat-Shrink-Tubing-2-1-Ratio- Industrial-Shrink-Tube-Cable-Sleeve-1.jpg

WIDE RANGE OF COLORS

Kable Kontrol 2:1 Heat Shrink Tubing is available in wide range of colors. These colored heat-shrink tube wraps are used for various applications, primarily for cables or wires identification, color coding, or to even match the color of the wire. The variety of options to pick from these colored shrink tubes allow customers to pick their desired color.

STEPS TO USE

Using the Kable Kontrol 2:1 heat shrink wrap is very easy. With few simple steps anyone can easily apply these shrinkable tubing. First, cut the desired length of the heat shrink tubing, then take your cable and put the shrink wrap sleeve over the cable, lastly heat the shrink-tubing evenly with the heat shrink gun and that’s it.

Kable-Kontrol-Heat-Shrink-Tubing-2-1-Ratio- Industrial-Shrink-Tube-Cable-Sleeve-4

WIDE APPLICATIONS

The 2:1 wire shrink wrap tubing by Kable Kontrol is used in a wide range of applications. This shrink wrapping is used both for industrial and personal use. The primary use of the heat shrink tubing involves electrical insulation, wire bundling, color coding, lightweight harnessing, wire strain relief, and wire identification purposes in a variety of home, commercial, industrial, and military applications.

Product Description

Kable Kontrol’s 2:1 heat shrinks tubing slides easily over small inline splices and connectors and shrinks down to 50% of its original diameter to fit snugly over any wire, hose, or cable management project. Also, polyolefin heat shrink tubing is the ideal way to terminate the ends of your braided sleeving, creating a tight, professional finish. This electrical shrink tubing shrinks to half of its original diameter and length shrinkage is approximately 5-7% during the shrink process. These polyolefin heat shrinks are flame retardant (Except Clear Color) and have high resistance to chemicals and oils. The operating temperature range is -67℉ to 275℉ (-55℃ to 135℃) and is rated for 600V. Additionally, it is in compliance with RoHS and is also UL Listed (File no E536025), the European directive on the Restriction of Hazardous Substances. This thin wall, 2:1 heat shrink tubing is made from a specially formulated, cross-linked polyolefin. Order heat shrink tubing rolls in your choice of length diameter and color. Durable, flexible, and flame-retardant Kable Kontrol’s polyolefin 2:1 heat shrink tubing can be used for electrical insulation, wire bundling, color coding, lightweight harnessing, wire strain relief, and wire identification purposes in a variety of home, commercial, industrial, and military applications. Lastly, this heat shrink tubing also has MIL Spec AMS-DTL-23053/5: 101 and 301 which stablishes the requirements for various types and colors of electrical insulating sleeving that will shrink to a predetermined size upon the application of heat.

Note: Inside Diameters for Heat Shrink Tubing are measured as ROUND Tube, Not FLAT


Marc-Pascal
Reviewed in Canada on January 22, 2025
Exactement ce que jai commander.Efficace et Canadien.
Dennis N
Reviewed in Canada on January 1, 2025
Will work great
clhrwh
Reviewed in the United States on July 12, 2024
We use this to seal the end of rope that is sent overseas as part of sewing kits for mission projects. It works just as we hoped. It's nice to have a clear color choice. We've ordered twice and will continue to do so.
Robert C.
Reviewed in the United States on May 5, 2024
Brought this heat shrink to use over 1/0 wire to color coordinate my Big 3 positive RED wire. Needless to say if I ordered green, it should at least have been green'ish and not turquoise color. Ok... I have extra paint that I can paint it to match (which is what I should've did with the RED wire than to heat shrink color match it). Well....after using the heat gun to shrink it, there were SPOTS that DIDN'T shrink and bubbled up (gun was on lowest setting and WASN'T held in one spot) which leads me to believe that the material is poor quality at best.... a complete WASTE of time and $$$.
Timothy Watts
Reviewed in the United States on March 20, 2024
I ordered these for a rewiring project I am working on, and needed a secure and dry way to cover the wires and terminals. The color of the shrink is not quite as pictured, as in person it is more muted or washed out/ pastell is over being that vivid bright color. If you are looking for a bule color to identify or to segregat terminals then this is what you need. One issue I have and not a negative or positive l, but when you heat this is makes more of a tube over shrinking down and conforming to the odd shape of what you might be needing to cover.so if you need a colored , more tubed shaped and are not picky about how vivid/ dull color with a flat finish, you are in the spot!!! For the size in my application the size is too small or just bigger than my needs are on this project. All though with some creative thinking I am still able to make it usefull and I as sure the next project it will not perfect. The length will insure I have more than enought for my next sl several projects. Now for the value, it was moderately priced bit for those projects that pop up having this amount on hand is so much better than having to stop working on a issue to go to the store to just pick up some.....I hope this helps you make your decision easier....
Khuongthanh
Reviewed in Canada on December 12, 2024
Good
John K
Reviewed in the United States on November 8, 2024
After replacing my house windows that had internal alarm button sensors, and rewiring for new external alarm sensors, this heat shrink tubing worked perfectly to keep the wires together to rout around to the new edge sensors.
IrishBeard
Reviewed in Canada on April 15, 2024
Nice color
Wicked Styx Custom Rods
Reviewed in the United States on May 13, 2023
The media could not be loaded.
scott harrison
Reviewed in the United States on October 22, 2023
It's a faded orange color. Still shrinks like it should but is almost a salmon shade.
Scott
Reviewed in the United States on October 19, 2023
Worked fine for my use to make tomato stakes stand out more. They are much easier to spot from far away. (Used to mark survey points)BUT I found several nicks in the shrink wrap. If I was an electrician I would have been pissed. Rolls kinda made me think of factory rejects. Not good enough to sell to professionals but easy to unload on Amazon. Work great for my use.
Rasbazz
Reviewed in the United States on April 2, 2023
It came wrapped in two clear plastic bags both sealed really well. The outer plastic bag was very entertaining. You will see what I mean lol. Before shrinking it's color was sort of a dark battleship gray with a hint of brown in it. After it goes to black. Un-shrunk and flattened out it looked way too big to be 3" it is 5" flattened out. But then pretty much rounded it measured 3-1/8", 3-1/4" and after shrinking right to 1-1/2".A good heat gun with higher CFM output is a must as it needs a goodly amount of heat. And it retains heat for a few minutes. It is quite strong so need something formidable to cut it with such as very heavy scissors/shears or even tin ships. I would buy again.
T.Tucker
Reviewed in Canada on May 13, 2022
Nothing exciting here. Read the headline.
Recommended Products