Your cart is empty.
Your cart is empty.graphtech black tusq nut 6 string electric 42 x 6
Mitchell Petty
Reviewed in the United States on February 28, 2025
worked okay
Derick L. Martin
Reviewed in the United States on February 2, 2025
Not much to say here. Nut was a drop in replacement on my ESP LTD EC-401. Helps improve tuning stability.
Oinkers
Reviewed in Canada on February 12, 2025
I put one of these on a LTD EC 1000 CTM to replace the stock plastic nut, and it never goes out of tune now. Permanently lubricated too, so no need to use nut sauce.
PaleBlueDot
Reviewed in the United States on January 8, 2025
I have an ESP E-II M-II and this nut is ever so slightly too short in length and too short in height. The width and string spacing is spot on though. I put Tusq nuts in all of my guitars as they are great. After researching deeper it appears that the 6642 nut fits most ESPLTD guitars, however, not all. For the ESPs that the 6642 isn't quite big enough (ESP E-II and others) the 6143 is the right fit as it is taller and longer by a hair. I've ordered the 6143 so fingers crossed that this time it fits !!!
SoMoMule
Reviewed in the United States on January 17, 2025
Fit my Harley Benton PRS clone perfectly. No shimming, correct height right out of the package.
Mauricio C.
Reviewed in Mexico on January 13, 2025
La altura de la cejuela es baja y toca el primer traste, la calidad de la cejuela se ve de calidad.
Chad
Reviewed in the United States on May 26, 2024
Didn't need to modify at all. Same size as factory nut. Fit right into place, glued it then done.
Miguel
Reviewed in Spain on December 29, 2024
La he usado para una guitarra Harley beton , solo he tenido que rebajar unos milímetros la base y listo.
moneill13
Reviewed in the United States on November 13, 2024
This is too small for LTD EC-256. It sits too low. What fit mine was the PT-6143-00 . The 6143 fit perfectly!! No sanding just a spot of glue and it stays in tune perfectly.
Minna
Reviewed in the United Kingdom on January 23, 2024
Excellent nut, very useful to maintenance the guitars in tune and affects the sound in very positive ways totally recommend it
Brian Rollins
Reviewed in the United States on March 3, 2021
Unfortunately I listened to folks online saying this was the right nut to fit an Ltd ec-256. It is the perfect length and correct string spacing but the height is too low. The stock nut is 8mm high and this nut is only 7.69mm high. So I returned this pt-6642-00 and got the right one for my ec-256 which is the pt-6143-00. You might have to sand it down just a hair but it’s well worth the effort. Sounds great on this guitar for sure.
David
Reviewed in the United States on December 17, 2019
This is the best nut I have ever dealt with on a guitar. I actually bought this for a Les Paul kit I’m building, but I have another guitar that I wanted to try it on. This nut will fit both guitars with only minimal, if any adjustments. On the guitar I just put it on, the action finally came down to where I wanted it. The tuning is much easier and so far stays in tune better. And a buzz on theG string I never could nail down is gone. Bottom line. I’m ordering this nut again for the kit guitar. And I expect it to perform as just as well and have no problems. These nuts require a good amount of measurement to insure an accurate fit. I nailed this one and got exactly what I needed. Well worth the money. Nut came well packaged to protect it, and with a nice “handwritten” note.
カスタマー
Reviewed in Japan on October 22, 2019
一弦がまっすぐペグまで届くタイプのギターであれば問題無いと思いますが、通常3対3のペグのギターだと、一弦は少し下向きにペグに進んでいくので、その場合この商品ですと一弦の溝が浅いので弦が溝から外れてしまうと思います。溝を深くするか、一弦のペグにむかって斜めに溝を拡張するかの必要があります。
Recommended Products
$17.63
$ 7 .99 $7.99