Your cart is empty.
Your cart is empty.This 10-Outlet D10-PFP Circuit-Breaker Protected Power Distributor by Panamax offers 10 rear-panel outlets for your equipment, all steel construction and a heavy-duty, 6-ft 14-gauge cord. It's rated 15 amps, is circuit-breaker protected and has a sturdy one-rack space design.
danny
Reviewed in the United States on August 22, 2023
This thing distributes power and mounts to a rack. Pretty simple task and it does it well. Much better than another brand’s unit that I tried where all the neutral and hot wires were reversed. Tested this one and all the outlets are wired correctly.
Richard C.
Reviewed in Canada on December 18, 2018
Very nice distributor for sure."Very Solid and Well Made with Heavy Copper Wiring". But, my mistake, ordered it somehow thinking it was a voltage regulator. What was I thinking? Nonetheless, if this is something you may require, it'd be a good purchase indeed! Enjoy..
B
Reviewed in the United States on March 16, 2017
Solid piece of gear. I unscrewed the casing to take a peak inside and no corners were cut. Shrink wrap tubing around wiring ends, solid grounding of all components, high quality 14 gauge cord set and excellent solder work. No excess wiring inside which means they thought through the build process and cut interconnecting wiring to length- minimizes heating and resistance. Of note, I would plug higher amperage equipment closer to the cord set side since the current will travel the least distance inside the case. But in all likelihood, will probably not affect anything, but in the off chance- strictly my engineering mind coming through. Note there is no on/off switch, surge protection or noise protection. The circuit breaker cannot be used as an on off switch. Green LED light to indicate power presence.
Orcinus24x5
Reviewed in Canada on January 9, 2016
Rock-solid build, extremely thick-walled steel construction. This thing is bomb-proof.
fba
Reviewed in the United States on January 12, 2016
What can I say? This product is basically a rack mount power strip.I am now using two of these in a half rack in my basement to house a couple of computer servers, some networking gear, and related accessories. My goal was to only have one or two power cables coming out of the rack so that I could easily pivot the rack on the wheels it has. This allows me to stick the rack in a corner, but roll it out to work on it when needed.These units installed with no trouble at all. There are no rubber feet on the bottom like other PDUs have, so they fit nicely in 1 RU directly on top of each other. My only minor gripe is the orientation of the power outlets. Some computer equipment uses "wall-warts" which often cover up a second outlet, no matter how you plug it in. To deal with that, I purchased some 1ft power cords, and just hang the "wall-warts" off those cables. The end result is all of the outlets are usable and I get the containment I wanted in my small rack. While I am not a fan of the orientation of the outlets, I am not deducting any stars because the real problem is the "wall-warts" not the outlets.Overall, these seem to work just fine for what they are. I look forward to not having to mess with them for a long time.
Groundhog69
Reviewed in the United States on July 4, 2013
This item is what it is described to be. I just made the mistake of not looking close enough and did not realize it does not have a switch on it. Like the headline says its functional but I really need a switch on the front for my purposes.
ahoffoss
Reviewed in the United States on December 5, 2013
I can't begin to tell you how many of these I've purchased?! They are perfect for clean home installations, or better for the "more obvious" rack mount installs! Either way, great product for a REALLY great price! They plug into a standard 110 outlet.
GB
Reviewed in the United States on April 18, 2013
Nothing flimsy about this unit - construction is very solid. It bolts nicely into my equipment rack, with all the outlets in the back where I need them and a nice powder-coated front panel. The 6-foot cord is just the right length, and the unit has no surge protection, so I can plug it into my UPS (plugging anything with surge protection into a UPS is generally a no-no). I highly recommend the D10-PFP for anyone looking for this set of features.
C.K.
Reviewed in the United States on September 5, 2011
Basic unit which does what it is intended to do. When I first ordered it I didn't read closely and was thinking that it had at least a degree of circuit protection, which it does not. It is not a power conditioner or surge protector at all, but basically a rack mounted multi-outlet strip. I have this unit connected to a power conditioner and by using it this way I now have circuit protection for multiple outlets. It wouldn't be wise to overload it with too many pieces of equipment, but for basic power distribution it works just fine. I have a small pair of powered monitors connected to it, as well as a headphone amp, a rack mounted tuner, and a digital keyboard, none of which are power hungry monsters. It works fine with these few items.
Everette A. Himel
Reviewed in the United States on May 19, 2010
The unit is great, the unit does what it is made to do. This unit is a Panamax-Furman which it offers more outlets than any other unit on the market. It doesn't have all the bells and whistles like lamps, power meters. If you are looking for a unit to organize all the equipment in your rack this unit works out great. I use this unit to power my non high demand equipment like mixers, cds, eq, etc. Power amps should be plugged directely into the wall. The unit was advertised with mounting screws. which it didn't come with. The seller told me it was a manufacture issue. I contacted the manufacture and this unit does not come with mounting screws. I had to contact the seller since they advertised the unit with mount screws. My review for the unit, which is that it is a great unit. Just be prepared that there are no mounting screw if any are advertised.
Recommended Products
