Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools 10 pieces of carbide inserts for Accusize 3/8" and 1/2" Indexable Carbide Turning Tool Set
Accusize Industrial Tools 10 pieces of carbide inserts for Accusize 3/8" and 1/2" Indexable Carbide Turning Tool Set
- Carbide insert TiN Coated MGMN200 for MGEHR06-2J and MGEHR08-2J tool holders
- Carbide insert TiN Coated 11ER for SER0375J11 and SER0500J11 tool holders
- Carbide insert TiN Coated WCMT2.52 for SWGCR06-2J and SWGCR08-2J tool holders
- Carbide insert CVD Coated CCMT21.51 for SCLCR06-2J, SCLCL06-2J, SCLCR08-2J and SCLCL08-2J tool holders
- Carbide insert TiN Coated DCMT21.51 for SDNCN06-2J, SDJCR06-2J, SDNCN08-2J and SDJCR08-2J tool holders
MGMN200 Double End Carbide Cut-Off Insert
- SKU: 2403-4022
- TiN Coated Carbide Inserts
- Corner Radius: 0.008"; Thickness: 0.079"
3/8" or 1/2" Accusize Cutoff Tool Holder
Working with Accusize 3/8" and 1/2" Cut-Off Holder, Parting Tools
- MGEHR06-2J
- MGEHR08-2J
16ER
- SKU: 2652-0025
- 16ER AG60
- TiN coated
- C6 Grade Coated
3/8" or 1/2" Accusize Threading Tool Holder
Working with Accusize 3/8" and 1/2" threading tool holders
- SER0375J11
- SER0500J11
WCMT32.51 Carbide Insert
- SKU: 2139-1024
- Carbide Inserts
- TiN Coated
- C6 Grade Coating
- WCMT32.5
- Insert Style: WCMT
- ISO Designation: WCMT06T304
- Works with various turning tools
3/8" or 1/2" Accusize Turning Tool Holders
Working with Accusize 3/8" and 1/2" turning tool holders
- SCLCR06-2J
- SCLCL06-2J
- SCLCR08-2J
- SCLCL08-2J
DCMT32.51 Carbide Insert
- SKU: 2104-1014
- TiN coated
- C6 Grade Coated
- Ansi: DCMT32.51, ISO : DCMT11T304
3/8" or 1/2" Accusize Turning Tool Holders
Working with Accusize 3/8" and 1/2" turning tool holders
- SDNCN06-2J
- SDJCR06-2J
- SDNCN08-2J
- SDJCR08-2J
Features of CVD Coating Inserts
CVD Coating
- TiN Layer with solubility to Fe enabling welding resistance.
- Al2O3, high free energy formation for chemical stability, providing welding and crater wear resistance
- TiCN layer with high hardness at room temperature to provide resistance to flank wear caused by mechanical rubbing
- Special substrate with a tough layer to prevent crack propagation, enabling high fracture resistance
Features of chipbreaker
- For medium-duty turning
- With the broad capability for steel and stainless steel
- Operations: turning, facing and profiling
- Advantages: all-round, reliable with problem-free machining
- Limitations: depth of cut and feed, risk of overloading the cutting edge
- Components typically: axles, shafts, hubs, gears, etc.
Specifications
ANSI #: CCMT21.51-MD ( = ISO CCMT060204-MD)
Insert Style: CCMT
Insert Size: 21.51
7 degree
Insert Grade: BPS101
Chip Breaker: MD
Material: Carbide
Coating: CVD Al2O3 TICN
Machining Parts Material: Steel
Machining Process: Finish
- IC: 1/4"
- Thickness: 3/32"
- Hole: 0.110"
- Radius: 1/64"
CCMT21.51 Carbide Insert
CVD Coating
- BPS101 Black/Yellow Coating Grade
- CVD coated carbide grade, wear-resistance materials coated on the gradient sintered substrate which has both good hardness, toughness
- Can bear high temperatures
- For steel and steel castings finishing to roughing processing
- Continue cutting to light interrupted cutting
- Machining of gray and ductile iron at low to medium cutting speed
- For hard materials continuous cutting and light interrupted cutting from finishing to roughing
- Wet and dry processing
- Combination of fibrous TICN and fine grained Al2O3 increases abrasion resistance and anti-chipping
- Preferred choice chip breaker on General Purpose Finishing
Could not assemble Tom and Jerry to work
Reviewed in the United States on October 18, 2024
Worked as expected good price
Dany
Reviewed in Canada on December 11, 2023
C ok
Jordan
Reviewed in the United States on January 6, 2023
This company has impressed me time and time again, and even though they are not the cheapest option, I find that they are the best reasonable option out there. These inserts last an extraordinarily long time, and I have put them through metals I never shouldn’t have been turning with these… Don’t tell the guys… but I even used these on wood… You know that stuff that grows outside and has leaves attached to it… it’s OK though, it was for a gift for my Girlfriend.I’ve tried really high-end, carbide inserts, and I’ve tried the really cheap ones, but Accusize brand is unequivocally the winner in my opinion. They have good quality control, and I haven’t received a bum lot from them yet!This multi pack has just about everything you would need to get up and running, and for a decent price! It’s also a good idea when starting out, or even if you have years experience, to try out new inserts to see what you like. I’m using inserts I never thought I would be using just because I found them by accident.I use these on my 10 X 22 metal lathe, and they haven’t let me down. They have a great wear, a good edge, and if you take care of them and hung them on a stone or diamond plate, will last you a very long time. Highly recommend!!
D. Ashley Cohen, Ph.D.
Reviewed in the United States on October 23, 2022
And a great deal cheaper. Can easily be mounted to custom made shafts of different shapes and used for hollowing. Nicely contained in a compartmentalized box.
User
Reviewed in Canada on February 5, 2021
Background: I'm a hobby machinist with a 12" South Bend lathe (c.1984). It gets regular use for small neighbourhood and household improvement projects. I'd previously bought the Accusize "2387-2001" kit which I rated 4-stars for build quality, packaging, and tool hardness.This is a "refill" kit with replacement cutters for the above kit (and apparently the 2387-2004) and has the same strengths and weaknesses: amazing packaging, well machined and hardened cutters but not the sharpest.As with the originals, II'll likely reserve this set for aluminum, light brass and copper. (plastics too)Still a great value and perfect replenishment for the 2387-2001 kit.
Recommended Products