Your cart is empty.
Your cart is empty.Product Description
350W Heat Gun + Reflector Nozzle & 195PCS Heat Shrink Tubing Kit
High Efficiency Working
350W mini heat gun tool can quickly reach 392°F/662°F in 1.5 seconds, when you work at the places which not easy to reach, the mini heat gun is especially suitable for heating the object there; the heat gun can concentrate high temperature to heat the items, even you work in narrow area to make work more efficient.
UL Listed, Shrink Ratio 4 : 1, Waterproof
- Are you looking for a quick way to repair damaged wires? FloweryOcean heat shrink tubing is very easy to use and can be used in automotive, marine, and home electrical wiring projects. Matching with Mini Heat Gun + Heat Shrink Tubing Kit, can achieve your goal. Because heat gun can quickly reach 350℃ in 1.5 seconds, helps you quickly repair wires.
- This Industrial Heat-Shrink Tubing is UL listed and is compliant with all relevant electrical standards such as: SGS, RoHS, Reach, and ISO9001.
- When heated, the wire shrink tubing shrinks to 1/4 it's original diameter, and the high shrink rate makes it possible to repair most damaged wires without removing the connectors. 4:1 shrink ratio tubing can be used in significantly more applications. The insulation 4:1 heat shrink tubes solve the problem of 2:1 shrink ratio not shrinking tight enough. Heat shrink tubing shrinks around wires and make a tight seal, no air gap between the wire, good insulation and electrical insulation.
Heat-Gun & Shrink-Tubes Package：
- Diameters 1/6" : 80 PCS
- Diameters 1/4" : 50 PCS
- Diameters 5/16": 20 PCS
- Diameters 1/2" : 25 PCS
- Diameters 5/8" : 10 PCS
- Diameters 3/4" : 10 PCS
- 1 x 350W Mini Heat Gun
- 1 x Reflector Nozzle
- 1 x Instruction Manual
- 1 Roll Self Adhesive Tie
- 50 x Electrical Cable Ties
195 Pcs Heat Shrink Tubing with Adhesive and Double Wall Product Information
Heat activated adhesive inner layer
This is a waterproof shrink tube with an internal adhesive layer. When heated, the tubes would shrink and the internal adhesive layer would be melted. A small piece of clear adhesive can be seen at the end of the heated tube. When cooled down, it forms a rigid seal. The heat activated glue adheres strongly to wires.
Waterproof
- 4:1 Heat shrink tubing shrinks around wires and make a tight seal. As the glue flows, it squeezes the air out and fills any gaps between the wire and the tube, which makes the connection waterproof.
- Suitable for electrical insulation, grouping cable, color coding, mechanical protection, wire / cable splices and repairs, etc.
Safe
- UL Listed
- Rated 600V
- High Temperature Resistant
- Abrasion & Impact-Resistance
- Long-lasting usage
Dual Temperature & Speed
Mini heat gun has dual temperature settings, I: 392°F, 100L/min; II: 662°F, 300L/min, Double heating wire & 350W high power, Low speed and heat for delicate or detail work, high speed and heat for high volume work.
UL Listed & Overheat Protection
High stable DC motor which is strong power for efficient operation in low noise. Double heat coil can quickly generate high heat in a few seconds. It is built in Overheat protection, when hot air gun work for too long or hot, it will automatically stop working.
Heat Gun For Shrink Wrap
Use the heat shrink gun to heat shrink wrap. You can easily wrap your items or gifts in shrink wrap.
Mini Heat Gun Wide Range of Applications
Removing Air Bubbles From Epoxy Resin
- Simply turn on the mini heat gun and heat 2-3 inches from the resin surface.
- Move the mini heat gun slowly so that the resin is heated evenly.
- After a few seconds the shallow bubbles will burst from the surface, but the deeper bubbles may take a few minutes.
Heat Gun For Crafting
If you like crafts, for example, crafting with epoxy resin, drying ink for oil painting, DIY shrink films, ceramics or soft clay work. With the mini heat gun you can easily make your own crafts.
Heat Gun For Heat Shrink Tubing, Repair Wires
Using the heat shrink tubing and the small heat gun is very simple: You choose the right sizes tubes, it encloses the cable and heats it with the small heat gun.
rakesh
Reviewed in the United States on February 24, 2025
Good value for money
John W
Reviewed in the United States on February 16, 2025
Works very well. Heats up rapidly. I’ve also used it to melt wax on skis for spot touch-ups.
ello a. nierras
Reviewed in the United States on February 14, 2025
delivered on time, nice packaging and most of all it really does the job done highly recommended this product.
Mwen
Reviewed in the United States on February 10, 2025
Great product.
Customer
Reviewed in the United States on January 10, 2025
A very good selection of heat Shrink tubing.
SLee
Reviewed in the United States on September 15, 2023
We needed to shrink wrap connections behind bulkheads on our sailboat. This kit fit the bill perfectly! We found it works best for our needs when used with the included heat reflector nozzle. The reflector nozzle provides for a more uniformly controlled shrink on water resistant butt connectors as well as the included shrink tubing. The only downside is that the heat reflector gets very hot and slips off as easily as it slips on. We learned very quickly to have a leather glove handy for recovering the heat deflector in tight spaces. This tool is exactly what was needed for the task at hand and an excellent dollar-wise value as well!
Michael
Reviewed in the United States on May 1, 2023
First, let me get the negative out of the way. Only 186 pieces of heat shrink tubing were in the package, and not the 195 which were supposed to be there. Yes, I counted them all. And the count on the smallest sizes was too low on one but a little bit higher than it was supposed to be on the next bigger size. But still short of the overall listed quantity. So Minus-1 on the rating right off the bat.Everything else was in the package. The mini heat gun, the heat deflector/reflector that slips onto the air nozzle, the 50 wire ties (aka zip ties), and the self adhesive strap (aka velcro strap).The hot air gun works, has two speeds/settings. The deflector works to help some hot air get to the 'back side' of the heat shrink tubing that you are working on. But physically it doesn't work all that well on the largest sizes, because there just isn't enough room and space for the shrink tubing to get in front of the nozzle and still get hot air around the tubing to bounce behind. I'll probably just use the hot air gun without the deflector and rotate things to shrink everything evenly.The heat shrink tubing does indeed seem to be 4:1 shrink ratio (yes, I tested all the sizes and measured the before and after sizes). And there is some heat activated adhesive in there as well.The 1.5 inch length of the pieces might be a little short for some uses, so do a trial fit of your layout BEFORE you shrink anything or finalize any connections. With the 4:1 shrink ratio you can just use two pieces of tubing and overlap one over the other a little bit and join them that way to get more length coverage. Not quite as neat as using just one longer piece of shrink tubing on the joint, but workable (if you plan ahead and do the test fit).All in all, a pretty good kit. I do recommend it, but count all the pieces when you get your order to make sure that everything is there. Overall, I give it a 👍 .
Jose elias
Reviewed in Mexico on December 14, 2022
todo muy bien, en tiempo y cumpliendo con lo requerido
Mert Cramer
Reviewed in Canada on January 27, 2021
See the header.
Suzanne Provencher
Reviewed in Canada on December 7, 2020
works great
Customer
Reviewed in the United States on April 9, 2019
The heat gun and shrink tube work fine. A good assortment of tube sizes is provided and so far work as expected.However, the product description mentions twice that it comes with a "storage case".Most of us would assume that means some sort of plastic storage case or something similar. Nope. The "storage case" mentioned is just the flimsy cardboard box it ships in. Sure, you can store the gun and tubing in there, but its all crammed in with no order and you have to dump everything out to get what you need. It won't take much time for this "storage case" to start falling apart, especially once it is wet. I bought this item to use on the wiring on my boat, so a cardboard case is not realistic. In the end I had to spend another $5 on a plastic storage case that houses the heat gun and shrink tube. Had I known this when purchasing I would have bought a different item that included a real case.Make sure you are aware of this when purchasing.
Recommended Products