Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell 2Pcs Red Green Indicator Light AC/DC 110V, 22mm Panel Mount, for Electrical Control Panel, HVAC, DIY Projects

Free shipping on orders over $29.99

$8.49

$ 3 .99 $3.99

In Stock

1.Style:110v


About this item

  • RED GREEN LED indicator lights drove with AC/DC 110V VOLT
  • Industrial standard 22mm (7/8") mounting diameter
  • Low behind the panel depth (37mm) and come with a panel locking nut (Fits Panel Thickness: ≤6mm)
  • Screw-clamp connection provides firm contact for reliable operation. Tested over 20,000 hours of using time, they will surely offer a steady performance
  • Widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panel such as HVAC Panel and electrical Panel, DIY Projects such as PLC Training Project



Product Description

1

  • AD16 Series LED Indicators are applied high-bright LED chips as the light source with long service life, low energy consumption, and lightweight.
  • These indicator lights are mainly used on the circuit or mechanical equipment to monitor and alarm the operation status of the equipment, indicate whether power is on or show the operating condition of an equipment device.
  • They are widely used in the ship, machine tools, machine equipment, switch cabinet and power distribution cabinet, electrical control panels such as HVAC panel and electrical panel, DIY Projects such as PLC Training Project.
1
1

Ultra-Short Body & Popular 22mm Size

  • These LED Pilot Lights feature a popular dimension and ultra-short body, which are good for installation places with narrow and small spaces.
  • Simply drill a 22mm (7/8") hole, and use the included screw ring to secure this Indicator Light to the power source.

Customer Reviews
4.2 out of 5 stars 83
4.8 out of 5 stars 10
3.5 out of 5 stars 13
3.8 out of 5 stars 6
Mounting Hole Dia. 28mm 22mm 16mm 22mm 16mm
Buzzer x x
Color Single Color Single Color Single Color Dual Color Single Color
Light Type Flashing Light Flashing Light Flashing Light Constant Light Constant Light
1

For Home Appliances & Garage

From the water heater, the boiler system to the garage door, they will show the open and close status of the door or equipment. Add these indicators to any circuits.

1

DIY Project

e.g. PLC training project

1

Industrial Electic Control Panel

For any electric panel such as Switch Cabinet, Power Distribution System, HVAC Panel, Escalator Control Panel

1

Design Improvement

Refit to the automobile or boat engine room to assist in steering


Novais
Reviewed in the United States on November 6, 2024
Low price, and works perfectly. Great purchase!
G. Wideman
Reviewed in the United States on November 14, 2024
I was wary that such a light rate for 110V and 220V would have a resistor value that would make it too dim on 110V. But it glowed fine on 110V.
TOM
Reviewed in the United States on April 1, 2024
The lights are 'fine' for my little project... Someone else mentioned that the wire terminal mounting was a thin as paper...... Not only are they fragile, but they are not "locked in" to the housing.. If you put virtually any pressure on the screw to tighten the wire, the terminal will twist out and break. I was very cautious and got to a point I had to add a drop of hot glue to either side of each terminal to hold them in the plastic housing. Adding the hot glue is no big deal, but it's a drag that the (wire) mounting is SO WEAK.... The everyday, average consumer would probably break them and return to Amazon or just toss them..... This issue should be evaluated by the manufacture.... The over all mounting is very easy - simple - secure.The light brightness is a 2.5 - 3.0 out of 5... It's "OK" and not great.....(Keeping in mind that both lights are about $8 bucks US.. Ha-...... These are not precision lights made in Germany or Japan....... They are what they are for $8 bucks....... )
Js
Reviewed in the United States on September 29, 2023
These are actually visible unlike the led replacement bulbs for sockets I had.
S.K.H
Reviewed in the United States on August 22, 2021
I bought this indicator light for a switch panel I designed that powers an electric fence charger on our chicken coop that energizes an electric parameter fence to keep predators out. I wanted a good red light that clearly indicates to people when the fence charger switch is "ON" to so that my kids and occasional chicken sitters would know that the fence is armed and disarmed.. Not only does it do that, but we can see the light glowing at night (about 175' away) letting us know the fence is on for the night or somebody forget to turn in on. Great product, Exact sized. Great and easy self contained and protected terminal connections too. Very please with this product.
DJM
Reviewed in Canada on July 10, 2021
The metal on this item is paper thin and falls apart when you attempt to connect a wire to it.Do not buy it - it is junk,
JD
Reviewed in the United States on November 16, 2021
Not visible in a lighted room or outdoor area, very disappointing as it’s only visible in the dark.
J
Reviewed in the United States on January 1, 2020
I installed this into a electrical enclosure along with a few other products i purchased on amazon to make a kill switch for my shop. The light is simply to indicate whether the power is running to the sub panel or not. Install was straight forward, there are two terminals on the back of the housing that unscrew and the wires can be inserted directly. Simple, straight forward product, not sure what i will do with the extra one, but the price of two was less than the singles.
Colette
Reviewed in France on November 15, 2019
J'avais des voyants identiques mais en 220V ils n'ont pas durés car la tension du réseau EDF est plus prés de 230v/237vJ'ai donc fait un essais avec ces voyants donnés pour 380v et ils fonctionnent très bien avec le 230v et je risque pas de les griller
Customer
Reviewed in the United States on January 20, 2019
Used to show when circuits either on or off for power tools being controlled be double pole double throw 220 v toggle switch.Easy to wire.